

Custom Hackpad
DIY Macro is a 9 key macropad with a rotary encoder and a 0.91 OLED display using kmk firmware.
- Size
- 64.3 × 82.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 23
- Pads
- 97
- Tracks, vias
- 153, 7
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 3 Jun 2025
- Updated
- 4 Jun 2025
Overview
Custom Hackpad is an open-source printed circuit board by FabioCastroMorffi, from the FabioCastroMorffi/DIY-Macro repository on GitHub. It is a 2-layer board of 64.3 × 82.9 mm with 20 parts on 23 nets, routed with 153 tracks and 7 vias.
Its parts include 9 diodes, 9 switches, 1 IC and 1 connector. It belongs with the keyboards and input and lEDs and displays boards and the RP2040 boards of this library.
README
README.mdDIY-Macro
DIY-Macro is a 3x3 macropad with a rotary encoder and an OLED display. It was designed as a Starter Project during the Highway event in Hackclub.
BOM
- 8x White DSA Keycaps
- 8x Cherry MX Switches
- 9x 1N4148 Diodes
- 1x XIAO RP2040 micro-controller
- 4x M3x16mm Screw Bolt
- 4x M3x5x4mm Heatset Inserts
- 1x 0.91 inch OLED display
- 1x EC11 Rotary Encoder
- 1x PCB
- 1x Case(divided into top and bottom, 3d printed)
Schematic

PCB


Something to improve in the future would definitely be track placement when routing. As the amount of components increases, effective routing becomes essential!
CAD Model
The model is very similar to the standard one from Hackpad. The case is held in place with 4 heatset inserts that hold the top and the bottom together. My main struggle relied on matching the openings for the top and the bottom together for all components. Having two instances of the top helped me with this due to being able to update the top and directly check whether it matched the pcb and the bottom.
The model was done in Fusion 360 (in the browser unfortunately)

Layers and Top View


Firmware
The firmware is done with the kmk library in Python and I will troubleshoot(if necessary) upon the receiving of the kit.
Thank you
To the Hackclub Team leading this event, thank you so much for the opportunity. This introduction to hardware has expanded my views on technology and given me the opportunity get a taste of hardware design. I'm truly grateful for that.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8, D10 |
| 5 | Key | OPL:MX_KeySwitch 3D | SW3, SW4, SW6, SW8, SW9 |
| 3 | SW_Push_45deg | OPL:MX_KeySwitch 3D | SW2, SW7, SW10 |
| 1 | Conn_01x04 | Oled_screen:SSD1306-0.91-OLED-4pin-128x32 | J1 |
| 1 | RotaryEncoder_Switch | Rot_encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW5 |
| 1 | XIAO-RP2040-DIP | OPL:XIAO-RP2040-DIP | U1 |
Similar boards
- 2 layers66.9 × 74.5 mm

- 2 layers86.4 × 64.8 mm

- 2 layers36.2 × 26.8 mm

Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm

Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm

TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm

Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm

FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772
Questions
How big is the Custom Hackpad PCB?
It measures 64.3 × 82.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Custom Hackpad use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Custom Hackpad KiCad files?
From the FabioCastroMorffi/DIY-Macro repository on GitHub, at the commit this page was made from: the board is PCB/custom_Hackpad.kicad_pcb and its schematic PCB/custom_Hackpad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Custom Hackpad design in my own project?
Its repository states no licence, so its author keeps all rights: ask FabioCastroMorffi before reusing the design.