
Relay shield
carlos-jenkins/relay-shield
Relay and current sensor shield for Spark Core

LA2NI OpenHPSDR Power Amplifier Protection board- kicad port
K PA Protec is an open-source printed circuit board by F6ITU, from the F6ITU/K_PA_Protec repository on GitHub. It is a 2-layer board of 102.5 × 75 mm with 91 parts on 70 nets, routed with 784 tracks and 194 vias.
It is built around the 74HC02, 74HC21D and LM1117-3.3, with the LM339, S1M and BAS16J among its other parts. Its parts include 27 resistors, 24 capacitors, 14 connectors, 7 diodes and 6 ICs.
OpenHPSDR P.A. OpenHPSDR Protection board by LA2NI (Munin 400)

This protection board is part of a set consisting of a 400 W LD-Mos based RF power amplifier (Munin 400), a medium power (600 or 1500 W) Zolotarev low pass filter, an Automatic Antenna Tuner (ATU) nickname « Aries » and a 4 port antenna switch.
All these developments are the work and intellectual property of Kjell Karlsen LA2NI and Laurence Barker G8NJJ.
This original work can be downloaded from
https://github.com/laurencebarker
The protection board ensures the physical measurements of the amplifier (VSWR, Power, Voltage, Current) and the shutdown of this amplifier in case of issues detected either by Aries (too high VSWR) or by any other sensor located on the amplifier itself or the ATU(temperature, voltage, current). It is used between Aries and Munin 400.
For more information, please refer to the Aries documentation (in the G8NJJ github repository)
This board was originally developed in September 2021 by Kjell LA2NI , with UltiBoard EDA. This repository is a « bug for bug » clone of the original Protection Board using the Opensource Kicad EDA. All these KiCad files are, consequently, the intellectual property of Kjell LA2NI.
This portage (convertion/translation) is placed under the CERN Open source/ Open hardware Licence.
Kicad is an Opensource EDA software maintained by the European Reseach Center CERN (Conseil européen pour la recherche nucléaire)
The original work is protected by the TAPR Open Hardware licence
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C5, C6, C8, C12, C13, C14, C16, C17, C18, C19, C20, C21, C22, C23 |
| 10 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R21, R23, R25, R26, R27, R28, R29, R30, R31 |
| 9 | 2.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R9, R10, R11, R16, R17 |
| 7 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7, R8, R18, R19, R20, R22 |
| 6 | S1M | Diode_SMD:D_SMA_Handsoldering | D2, D3, D4, D5, D6, D7 |
| 5 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C7, C9, C10, C15 |
| 4 | 1k | Potentiometer_SMD:Potentiometer_Bourns_TC33X_Vertical | RV12, RV13, RV14, RV15 |
| 4 | 2743021447 | Fair-Rite_2743021447:Fair-Rite_2743021447 | L1, L2, L3, L4 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C11, C24 |
| 3 | IDC 10 Straight | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J1, J3, J5 |
| 2 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | Molex KK 2 | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J4, J6 |
| 2 | Molex KK 4 | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J2, J8 |
| 1 | 22k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24 |
| 1 | 74HC02 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | 74HC21 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 1 | BAS16J | Diode_SMD:D_SOD-323 | D1 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | LM339 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | MCP23017_SO | Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm | IC1 |
| 1 | MH1 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | J9 |
| 1 | MH2 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | J10 |
| 1 | MH3 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | J11 |
| 1 | MH4 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | J12 |
| 1 | MH5 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | J13 |
| 1 | MH6 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | J14 |
| 1 | Molex KK 3 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J7 |
| 1 | RotaryEncoder_Dual_Switch | RotaryEncoder_Dual_Alps_EC11E-Switch_Vertical_H20mm:RotaryEncoder_Dual_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | YAAJ_DCDC_StepDown_LM2596 | Step_down:YAAJ_DCDC_StepDown_LM2596 | U6 |
The 89 most common of 91 parts.

carlos-jenkins/relay-shield
Relay and current sensor shield for Spark Core

jackhumbert/reform
This is the main repository for the MNT Reform open source laptop.

RonishNadar/open-01
OPEN-01 - Omnidirectional Perception & Embedded Navigation. An open-source, low-cost ROS2 robot platform.



ncssrtnvnthm/WATCH2026-theremin
Theremin project for the 2026 WATCH program


talonghtn-rgb/MachATmega32
Đây là dự án thiết kế và chế tạo bo mạch học tập lập trình nhúng sử dụng vi điều khiển ATmega32, được xây dựng nhằm phục vụ việc học tập, thực hành và nghiên cứu các hệ thống nhúng.
It measures 102.5 × 75 mm and has 2 copper layers, 1.6 mm thick.
91 parts, built around the 74HC02, 74HC21D, LM1117-3.3 and LM339. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the F6ITU/K_PA_Protec repository on GitHub, at the commit this page was made from: the board is K_PA_Protec.kicad_pcb and its schematic K_PA_Protec.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask F6ITU before reusing the design.