

MSP430FR21 Breakout
Basic breakout for the MSP430FR2111 chip
- Size
- 19.1 × 29.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 20
- Pads
- 74
- Tracks, vias
- 217, 19
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 21 Jun 2024
- Updated
- 16 Jul 2024
Overview
MSP430FR21 Breakout is an open-source printed circuit board by EzerLonginus, from the EzerLonginus/MSP430FR21_Breakout repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 19.1 × 29.2 mm with 19 parts on 20 nets, routed with 217 tracks and 19 vias.
Its parts include 7 capacitors, 3 resistors, 3 connectors, 2 ICs and 2 diodes. It belongs with the interfaces and adapters boards and the MSP430 boards of this library.
README
README.mdMSP430FR21_Breakout
Basic breakout for the MSP430FR2111 chip

Description
This board is a simple breakout using the MSP430FR2111 chip. All the pins of the chip are broken out into separate headers. There is an additional header on the top of the board to allow for plugging directly into the MSP-EXP430FR2311 evaluation board to upload code. The breakout can accept 5V through the onboard regulator, or 3.3V directly. There is a reset and onboard power indication LED. There is also a slot for a 32.768kHz clock and onboard LED connected directly to P2.0, for testing.
Front
Back
Purpose
I was looking to try out some development on the MSP430 series, slightly beyond the launch pads, and found a fairly inexpensive chip to try to develop for. I did make a slight error on the board that was ordered, which called out for 100nF capacitor on the reset line. This actually needs to be 1nF, and has been fixed in the susequent gerber and design files. Otherwise, the board basic goal has been achieved, and I'll continue to play around with the TI chip and architecture in the coming months to see what that is like.
Schematic

Layout

Updates & Fixes
Version 1
- Continue testing functionality of board and breakout
- Add some test code for the breakout
- Updated Reset capacitor or 1nF
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C6 |
| 2 | 18pF | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 2 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1, J2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 1nF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 32.768KHz | Crystal:Crystal_SMD_EuroQuartz_EQ161-2Pin_3.2x1.5mm_HandSoldering | Y1 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J3 |
| 1 | MIC5317-3.3xM5 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | MSP430FR2111 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U1 |
| 1 | P2.0 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | PWR | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | SW_SPST | Button_Switch_THT:SW_PUSH_6mm | SW1 |
Similar boards
- 2 layers43.9 × 27.7 mm

- 2 layers50 × 60 mm

Debate Device
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
19 parts915 - 2 layers102.9 × 96.7 mm

ISA adapter
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
19 parts805 - 2 layers60 × 39 mm

- 2 layers70.1 × 43.2 mm

Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396 - 2 layers80 × 80 mm

- 2 layers25.4 × 25.4 mm

Ina169
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
19 parts282 - 2 layers58.4 × 28.6 mm

New rele
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
19 parts269
Questions
How big is the MSP430FR21 Breakout PCB?
It measures 19.1 × 29.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MSP430FR21 Breakout use?
19 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MSP430FR21 Breakout KiCad files?
From the EzerLonginus/MSP430FR21_Breakout repository on GitHub, at the commit this page was made from: the board is hardware/MSP430FR21_Breakout/MSP430FR21_Breakout.kicad_pcb and its schematic hardware/MSP430FR21_Breakout/MSP430FR21_Breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MSP430FR21 Breakout design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).