

Hillside speedrun
Just a keyboard that I want to make ASAP
- Size
- 155.8 × 109.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 722
- Pads
- 1,293
- Tracks, vias
- 282, 9
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 May 2025
- Updated
- 15 Aug 2025
Overview
Hillside speedrun is an open-source printed circuit board by Eymeric65, from the Eymeric65/hillside-speedrun repository on GitHub, published under the MIT licence. It is a 2-layer board of 155.8 × 109.7 mm with 34 parts on 722 nets, routed with 282 tracks and 9 vias.
Its parts include 23 switches, 2 connectors and 1 IC. It belongs with the keyboards and input boards of this library.
README
README.mdhillside-speedrun
Just a keyboard that I want to make ASAP.
This repo is my speedrun attempt to make a keyboard with my optimized library. Date start 26/05/2025 at 12h15
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | ~ | Keyboard_CS:SW_UNIVERSAL_1.00u | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +7 |
| 4 | MountingHole | Keyboard_CS:MountingHole_2.2mm_M2_DIN965 | H1, H2, H3, H4 |
| 2 | Conn_01x01_Pin | Keyboard_CS:Pin_D1.0mm_L10.0mm | J1, J2 |
| 2 | Silkscreen | Keyboard_CS:drawing | Sk1, Sk2 |
| 1 | Battery_no_pin | Keyboard_CS:503020 battery hole | BT1 |
| 1 | SW_Push | Keyboard_CS:Reset_Switch | MSW1 |
| 1 | ~ | Keyboard_CS:ProMicro_DUAL_jumper | U101 |
Similar boards
- 2 layers142.5 × 106.4 mm

- 2 layers26 × 30 mm

Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 2 layers171.2 × 72.9 mm

Amiga gfxcard old
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
34 parts1k - 2 layers53.5 × 62.5 mm

Led matrix
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
34 parts915 - 2 layers45 × 26 mm

- 2 layers41.7 × 25.7 mm

Headphones flex pcb rigid
strangeparts/niubi-headphones
Flexible circuit board design for adding a headphone jack to an iPhone 7
34 parts493MIT - 2 layers18.8 × 16.3 mm

- 2 layers127 × 69.9 mm

Ezcgi
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.
34 parts446
Questions
How big is the Hillside speedrun PCB?
It measures 155.8 × 109.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hillside speedrun use?
34 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hillside speedrun KiCad files?
From the Eymeric65/hillside-speedrun repository on GitHub, at the commit this page was made from: the board is hillside_speedrun/hillside_speedrun.kicad_pcb and its schematic hillside_speedrun/hillside_speedrun.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hillside speedrun design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).