
Encoder go v1 rev1
Every-Flavor-Robotics/encoder_go_hardware
hardware files for encoder go project

hardware files for encoder go project
Encoder go v1 rev2 panel 5x5 is an open-source printed circuit board by Every-Flavor-Robotics, from the Every-Flavor-Robotics/encoder_go_hardware repository on GitHub. It is a 2-layer board of 200 × 190 mm with 260 parts on 324 nets, routed with 1,980 tracks and 360 vias.
Its parts include 72 diodes, 72 connectors, 36 capacitors, 36 resistors and 36 ICs.
hardware files for encoder go project
| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1 +20 |
| 36 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1 +20 |
| 36 | BM05B-SRSS-TB_LF__SN_ | SnapEDA Library:JST_BM05B-SRSS-TB_LF__SN_ | J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1 +20 |
| 36 | LED | Diode_SMD:D_0805_2012Metric | D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1 +20 |
| 36 | MT6701-SOP8 | Magntek:MT6701_SOP8 | U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1 +20 |
| 36 | SMAJ6.0CAe3_TR13 | aaa_SamacSys_Parts:DIONM5025X225N | D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2 +20 |
| 36 | optional features | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2 +20 |
| 8 | Fiducial | Fiducial | KiKit_FID_B_1, KiKit_FID_B_2, KiKit_FID_B_3, KiKit_FID_B_4, KiKit_FID_T_1, KiKit_FID_T_2, KiKit_FID_T_3, KiKit_FID_T_4 |

Every-Flavor-Robotics/encoder_go_hardware
hardware files for encoder go project

Every-Flavor-Robotics/encoder_go_hardware
hardware files for encoder go project

swiftrax/Trifecta
Open source Alice like mechanical keyboard with arrow keys and support of up to 3 rotary encoders




nearestexit/dimension1800
QMK Compatible RP2040-based USB PCB for the Siemens 10453443 / KBA-D2911



It measures 200 × 190 mm and has 2 copper layers, 1.6 mm thick.
260 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Every-Flavor-Robotics/encoder_go_hardware repository on GitHub, at the commit this page was made from: the board is encoder_go_v1/encoder_go_v1_rev2_panel_5x5/encoder_go_v1_rev2_panel_5x5.kicad_pcb and its schematic encoder_go_v1/encoder_go_v1_rev1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Every-Flavor-Robotics before reusing the design.