2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0
2 layers14.1 × 53.9 mm
SensorBoard
Ethancao123/WhackHallEffect- Size
- 14.1 × 53.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 8
- Pads
- 33
- Tracks, vias
- 40, 6
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 2 May 2025
- Updated
- 3 May 2025
Overview
SensorBoard is an open-source printed circuit board by Ethancao123, from the Ethancao123/WhackHallEffect repository on GitHub. It is a 2-layer board of 14.1 × 53.9 mm with 14 parts on 8 nets, routed with 40 tracks and 6 vias.
It is built around the DRV5011ADLPGM. Its parts include 4 capacitors, 3 ICs and 2 connectors.
Main components
1README
README.mdWhackHallEffect
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF 10V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4 |
| 3 | DRV5011ADLPGM | Library:TO-92-3_LPG_TEX | U1, U2, U3 |
| 1 | 10k | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | TH1 |
| 1 | 10uF 10V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | Conn_01x02_Socket | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06_Pin | Library:CONN_B6B-ZR_JST | J1 |
| 1 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
The 12 most common of 14 parts.
Similar boards
- 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
Questions
How big is the SensorBoard PCB?
It measures 14.1 × 53.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SensorBoard use?
14 parts, built around the DRV5011ADLPGM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SensorBoard KiCad files?
From the Ethancao123/WhackHallEffect repository on GitHub, at the commit this page was made from: the board is SensorBoard/SensorBoard.kicad_pcb and its schematic SensorBoard/SensorBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SensorBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask Ethancao123 before reusing the design.