
OSO SWAT B1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

An arm that can sketch out drawings
PolarSketcher is an open-source printed circuit board by Esser50K, from the Esser50K/PolarSketcher repository on GitHub. It is a 2-layer board of 125.2 × 66.2 mm with 31 parts on 71 nets, routed with 514 tracks and 52 vias.
Its parts include 14 connectors, 4 resistors and 3 capacitors.
The polar Sketcher is a somewhat compact robotic arm plotter.
The motivation is to have a somewhat simple and cheap design to create a 2D plotter. It is also meant to not occupy a lot of space when idle as you don't need an entire XY CNC setup.
Take a look a the journey of this build (without looking at commits) https://youtu.be/corrBt9IMOM
The firmware of this project is designed to run on an esp32.
To upload the code from the command line run the following command from the PolarSketcherFirmware directory:
platformio run --target upload --environment uno
You may want to change the serial_port option in the platformio.ini file. The current one is meant for the raspberrypi when using the GPIO serial connection.
To download platformio in the first place run:
curl -fsSL -o get-platformio.py https://raw.githubusercontent.com/platformio/platformio-core-installer/master/get-platformio.py
python3 get-platformio.py
There is a feature still in development to allow for the storing of drawings in order to pick up where you left off. for this a local mongoDB is needed, for development se this to run mongodb locally:
docker run -p 27017:27017 -v $PWD/mongodb:/data/db mongo:latest
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 2 | 100u | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C1, C2 |
| 2 | Pololu_Breakout_A4988 | Module:Pololu_Breakout-16_15.2x20.3mm | A1, A2 |
| 2 | RPi_H_1 | Connector_PinSocket_2.54mm:PinSocket_1x14_P2.54mm_Vertical | RaspberryPiSpares1, RaspberryPiSpares2 |
| 2 | StepperDriverSelector | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | StepperDriverToggle1, StepperDriverTogglePower1 |
| 2 | StepperMode | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | StepperModeInput1, StepperModeOutput1 |
| 2 | V+ | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | ESP32Power1, RPiPower1 |
| 1 | 100n | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C3 |
| 1 | ENCODER | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J11 |
| 1 | ESP_H_1 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J12 |
| 1 | ESP_H_1 | Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Vertical | J4 |
| 1 | ESP_H_2 | Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Vertical | J5 |
| 1 | LIMIT_1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | LIMIT_2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | LIMIT_3 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | LIMIT_4 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | MOTOR_POWER | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | RPi_H_1 | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J13 |
| 1 | RPi_H_2 | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J14 |
| 1 | SERVO_PINS | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | STEPPER_1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | STEPPER_2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.


It measures 125.2 × 66.2 mm and has 2 copper layers, 1.6 mm thick.
31 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Esser50K/PolarSketcher repository on GitHub, at the commit this page was made from: the board is pcb/polar_sketcher.kicad_pcb and its schematic pcb/polar_sketcher.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Esser50K before reusing the design.