

Circuito Exp
Terceiro Trabalho de Expressão Gráfica (Circuito de Karaoke Party - Grupo C)
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 12
- Pads
- 33
- Tracks, vias
- 130, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 19 Nov 2018
- Updated
- 26 Nov 2018
Overview
Circuito Exp is an open-source printed circuit board by EricRdC, from the EricRdC/KiCad_ExpGrafica repository on GitHub. It is a 2-layer board with 13 parts on 12 nets, routed with 130 tracks and 0 vias.
Its parts include 2 capacitors, 2 resistors, 1 connector and 1 switch.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitors_ThroughHole:C_Disc_D7.5_P5 | C1, C2 |
| 1 | 10k | Resistors_ThroughHole:Resistor_Horizontal_RM15mm | R1 |
| 1 | 10k | Potentiometers:Potentiometer_Alps-RK163-single_15mm | POT1 |
| 1 | 10uF | Capacitors_ThroughHole:C_Radial_D5_L11_P2 | CP1 |
| 1 | 1k2 | Resistors_ThroughHole:Resistor_Horizontal_RM15mm | R2 |
| 1 | 220uF | Capacitors_ThroughHole:C_Radial_D7.5_L11.2_P2.5 | CP2 |
| 1 | 470uF | Capacitors_ThroughHole:C_Radial_D8_L11.5_P3.5 | CP3 |
| 1 | 6V | Connect:AK300-2 | BT1 |
| 1 | Alto-Falante | Connect:AK300-2 | AF1 |
| 1 | DIL8 | Housings_DIP:DIP-8_W7.62mm_LongPads | P1 |
| 1 | Microfone | Microfone:Microfone | M1 |
| 1 | SPST | Buttons_Switches_ThroughHole:SW_DIP_x1_Slide | SW1 |
Similar boards
- 2 layers40 × 20 mm

- 2 layers74.9 × 49.5 mm

- 2 layers35 × 29 mm

MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm

AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm

- 2 layers95 × 95 mm

Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm

Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0
Questions
What parts does the Circuito Exp use?
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Circuito Exp KiCad files?
From the EricRdC/KiCad_ExpGrafica repository on GitHub, at the commit this page was made from: the board is Circuito Exp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Circuito Exp design in my own project?
Its repository states no licence, so its author keeps all rights: ask EricRdC before reusing the design.