Skip to the content
2 layers36.8 × 42.5 mmEncoder, the printed circuit board in 3D

Introducing my ongoing robotics project, currently named DonkeyJet, inspired by the Donkey Car project. This mobile robot is built on an RC car frame and powered by Jetson Nano, providing a hands-on platform for…

Size
36.8 × 42.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
3
Nets
22
Pads
33
Tracks, vias
32, 3
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
17 Mar 2023
Updated
15 Jul 2023

Overview

Encoder is an open-source printed circuit board by EnthusiasticRoboticist, from the EnthusiasticRoboticist/DonkeyJet repository on GitHub. It is a 2-layer board of 36.8 × 42.5 mm with 3 parts on 22 nets, routed with 32 tracks and 3 vias.

Its parts include 2 ICs and 1 resistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.

README

readme.md

Workspace for DonkeyJet [Under ACTIVE CONSTRUCTION]

Introducing my ongoing robotics project, currently named DonkeyJet, inspired by the Donkey Car project. This mobile robot is built on an RC car frame and powered by Jetson Nano, providing a hands-on platform for practicing robotics knowledge. The goal is to continually enhance its capabilities while exploring various aspects of robotics technology. While I am not certain about the name DonkeyJet, I invite you to follow me on this exciting journey of discovery as I document my progress and share insights with fellow enthusiasts in my weblog here.

Parts

3
QtyValueFootprintReferences
11KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1Teensy2.0_(C)teensy:Teensy2.0_2U2
1~Library:ATS668LSM_1U1

Similar boards

  • 2 layers40 × 30 mmBlinky, the printed circuit board in 3D

    Blinky

    earthtojake/text-to-cad

    Design physical products with AI

    3 parts26kMIT
  • 2 layers51.9 × 16 mmPassive2-rpi non standard adapter, the printed circuit board in 3D

    Passive2-rpi non standard adapter

    hzeller/rpi-rgb-led-matrix

    Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

    3 parts4.4kGPL-2.0
  • 2 layers16.3 × 16.3 mmSensor, the printed circuit board in 3D

    Sensor

    scottbez1/splitflap

    DIY split-flap display

    3 parts4.2k
  • 2 layersSub, the printed circuit board in 3D

    Sub

    atopile/atopile

    Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

    3 parts4kMIT
  • 2 layers85 × 30 mmDual stomp, the printed circuit board in 3D

    Dual stomp

    torvalds/GuitarPedal

    Linus learns analog circuits

    3 parts2.5kGPL-2.0
  • 2 layers124.5 × 33.7 mm172319-1 connector, the printed circuit board in 3D

    172319-1 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    3 parts1.2k
  • 2 layers10.5 × 83 mmProgrammingAdapter, the printed circuit board in 3D

    ProgrammingAdapter

    stuartpittaway/diyBMSv4

    Version 4 of the diyBMS

    3 parts1.1k
  • 2 layers21.2 × 51.3 mmPico reset, the printed circuit board in 3D

    Pico reset

    hackclub/sprig

    🍃 Learn to code by making games in a JavaScript web-based game editor.

    3 parts1.1kMIT

Questions

How big is the Encoder PCB?

It measures 36.8 × 42.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Encoder use?

3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Encoder KiCad files?

From the EnthusiasticRoboticist/DonkeyJet repository on GitHub, at the commit this page was made from: the board is hardware/encoder/encoder.kicad_pcb and its schematic hardware/encoder/encoder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Encoder design in my own project?

Its repository states no licence, so its author keeps all rights: ask EnthusiasticRoboticist before reusing the design.