

Starbie week one
Starbie is a little robot pet with a star shaped PCB. It was designed using KICAD .I had alot of fun while building it and I learned new things along the way. Starbie is a small project, but its my first step into PCB design.
- Size
- 100 × 98.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 27
- Pads
- 54
- Tracks, vias
- 82, 7
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 16 Oct 2026
- Updated
- 17 Oct 2026
Overview
Starbie week one is an open-source printed circuit board by Eniola-Builds14, from the Eniola-Builds14/Starbie repository on GitHub. It is a 2-layer board of 100 × 98.8 mm with 8 parts on 27 nets, routed with 82 tracks and 7 vias.
It is built around the DHT11. Its parts include 2 ICs, 2 connectors, 2 switches and 1 resistor. It belongs with the ESP32 and RISC-V boards of this library.
Main components
1README
README.mdStarbie
Starbie is a little robot pet with a star shaped PCB. It was designed using KICAD .I had alot of fun while building it and I learned new things along the way. Starbie is a small project, but its my first step into PCB design.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | Conn_01x04_Pin | Imported Parts:Display_128x64_096_I2C | J1 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | XIAO-ESP32-C3-SMD | Imported Parts:XIAO-ESP32-C3-SMD | U2 |
Similar boards
- 2 layers96.6 × 82.8 mm

- 2 layers100 × 50 mm

Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm

- 2 layers

OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm

SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers

Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm

Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers30.5 × 77.5 mm

Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5
Questions
How big is the Starbie week one PCB?
It measures 100 × 98.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Starbie week one use?
8 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Starbie week one KiCad files?
From the Eniola-Builds14/Starbie repository on GitHub, at the commit this page was made from: the board is Starbie week one.kicad_pcb and its schematic Starbie week one.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Starbie week one design in my own project?
Its repository states no licence, so its author keeps all rights: ask Eniola-Builds14 before reusing the design.