2 layers52.3 × 10.5 mm
StackLink
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
29 parts5.1kGPL-3.0
2 layers48.3 × 30.5 mm
Fluxsens try1
EmilsSturitis/FluxSensBreakout board for DRV
- Size
- 48.3 × 30.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 13
- Pads
- 79
- Tracks, vias
- 160, 63
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Jun 2022
- Updated
- 5 Nov 2025
Overview
Fluxsens try1 is an open-source printed circuit board by EmilsSturitis, from the EmilsSturitis/FluxSens repository on GitHub. It is a 2-layer board of 48.3 × 30.5 mm with 29 parts on 13 nets, routed with 160 tracks and 63 vias.
It is built around the DRV5033AJQDBZ. Its parts include 10 capacitors, 9 resistors, 4 ICs, 3 connectors and 1 diode. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdFluxSens
Breakout board for DRV
📘 Overview
This project is a small breakout for a DRV5053RA
Designed for use in development of my Master thesis about non-invasive current measurments. It emphasizes small size and adaptability for placement of sensors in the development.
⚙️ Hardware Specifications
| Component | Function | Notes |
|---|---|---|
| DRV5053RA | Sensor | -45mV/mT |
📂 Related Resources
- Helpful Resources:
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | C_Small | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C5, C6, C12, C13, C14, C15, C16, C17 |
| 9 | R_Small | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R11, R12, R13 |
| 4 | DRV5033AJQDBZ | Package_TO_SOT_SMD:SOT-23 | U1, U3, U5, U6 |
| 2 | Conn_Coaxial | Connector_Coaxial:SMA_Molex_73251-2120_EdgeMount_Horizontal | J1, J2 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H5, H6 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | LED_Small | LED_SMD:LED_PLCC-2 | D1 |
Similar boards
- 2 layers56 × 20 mm
HallEffectXY Endstop
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
29 parts1.1kGPL-3.0 - 2 layers50 × 23.2 mm
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
29 parts1kGPL-3.0 - 2 layers16.8 × 13.6 mm
E Fidget Lite
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
29 parts915 - 2 layers85 × 12.5 mm
TERES PCB3-TOUCH BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
29 parts578Apache-2.0 - 2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 2 layers80 × 55 mm
- 2 layers55 × 58 mm
Questions
How big is the Fluxsens try1 PCB?
It measures 48.3 × 30.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fluxsens try1 use?
29 parts, built around the DRV5033AJQDBZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fluxsens try1 KiCad files?
From the EmilsSturitis/FluxSens repository on GitHub, at the commit this page was made from: the board is Hardware/fluxsens_try1.kicad_pcb and its schematic Hardware/fluxsens_try1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fluxsens try1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask EmilsSturitis before reusing the design.