

Moped Voltage Regulator SMD
- Size
- 35.4 × 38.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 11
- Pads
- 33
- Tracks, vias
- 61, 6
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 2 May 2024
- Updated
- 22 Sep 2024
Overview
Moped Voltage Regulator SMD is an open-source printed circuit board by EmielV2002, from the EmielV2002/Moped_Voltage_Regulator repository on GitHub, published under the MIT licence. It is a 2-layer board of 35.4 × 38.8 mm with 15 parts on 11 nets, routed with 61 tracks and 6 vias.
It is built around the BZT52C3V6-TP, IRLZ44NSTRLPBF and VS3EGH06-M3/5BT-HXY. Its parts include 4 resistors, 4 diodes, 2 transistors, 2 connectors and 1 fuse. It belongs with the power boards of this library.
Main components
3BZT52C3V6-TP
SOD-123-65℃~+150℃ 1 Independent 3.4V~3.8V 3.6V 500mW 5uA@1V 600Ω 90Ω SOD-123 Zener Diodes ROHSMicro Commercial ComponentsZener DiodesIRLZ44NSTRLPBF
D2PAK-55℃~+175℃ 1 N-channel 1.7nF 150pF 1V 22mΩ@10V 3.8W 47A 48nC 55V D2PAK MOSFETs ROHSInfineon TechnologiesMOSFETsVS3EGH06-M3/5BT-HXY
SMB-65℃~+150℃ 1 Independent 1.7V@2A 35ns 3A 5uA@600V 600V 80A SMB Fast Recovery / High Efficiency Diodes ROHSHXY MOSFETFast Recovery / High Efficiency Diodes
README
README.mdMoped_Voltage_Regulator
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 120 | Resistor_SMD:R_1206_3216Metric | R1, R4 |
| 2 | 1K | Resistor_SMD:R_1206_3216Metric | R2, R3 |
| 2 | BZT52C3V6-TP | Diode_SMD:D_SOD-123F | D5, D6 |
| 2 | IRLZ44NSTRLPBF | SamacSys:IRF2804STRLPBF | Q3, Q4 |
| 2 | NC20KC0470KBA | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | TH1, TH2 |
| 2 | VS-3EGH06-M3_5BT | SamacSys:DIOM5436X244N | D1, D2 |
| 1 | Conn_01x01_Socket | Connector_Wire:SolderWire-0.75sqmm_1x01_D1.25mm_OD2.3mm | J2 |
| 1 | Conn_01x02_Socket | Connector_Wire:SolderWire-0.75sqmm_1x02_P4.8mm_D1.25mm_OD2.3mm | J1 |
| 1 | Fuse | Fuse:Fuseholder_Blade_Mini_Keystone_3568 | F1 |
More from EmielV2002/Moped_Voltage_Regulator
1- 2 layers38.4 × 32.4 mm

Similar boards
- 2 layers88.5 × 86 mm

- 2 layers179.1 × 167.6 mm

- 4 layers217.2 × 201.5 mm

SolarSystem
louieoneil19/Thesis
Design and Control of a Solar-Powered Irrigation System for Remote Farmlands
71 parts - 2 layers19 × 76 mm

Sub
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
15 parts3kApache-2.0 - 2 layers26.7 × 62.2 mm

Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
15 parts1kGPL-3.0 - 2 layers100 × 44 mm

Videoslot
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
15 parts1k - 2 layers91 × 51 mm

BusinessCard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
15 parts915 - 2 layers24.3 × 57.9 mm

Flosspods pro flex
kenp-io/not-for-airpods-repairs
The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.
15 parts609WTFPL
Questions
How big is the Moped Voltage Regulator SMD PCB?
It measures 35.4 × 38.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Moped Voltage Regulator SMD use?
15 parts, built around the BZT52C3V6-TP, IRLZ44NSTRLPBF and VS3EGH06-M3/5BT-HXY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Moped Voltage Regulator SMD KiCad files?
From the EmielV2002/Moped_Voltage_Regulator repository on GitHub, at the commit this page was made from: the board is SMD/Moped_Voltage_Regulator_SMD.kicad_pcb and its schematic SMD/Moped_Voltage_Regulator_SMD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Moped Voltage Regulator SMD design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).