
Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

MAKE robotwars
Controller is an open-source printed circuit board by Elp03, from the Elp03/MakeRobotwars2023 repository on GitHub. It is a 2-layer board of 72 × 57.5 mm with 11 parts on 36 nets, routed with 40 tracks and 0 vias.
Its parts include 1 resistor and 1 IC. It belongs with the ESP32 boards of this library.
MAKE robotwars
Pins that work on an esp 32 D32 - PMW port D33 - PMW port D35 - not a PMW port but acctualy works with analogread D34 - works not used for PMW or analog read D39 - Named VN(why?) perfect for boleans D36 - Named VP(why? i dont know) perfect for boleans Pins that does not wort with ESP_NOW D25 D26 not work, dont thing adc2 works with esp32
Controller Joystick x: D34 y: D35 Buttons Start/stopp robot: D39 Start/stopp wepon: D36 Potmeter pot: D33
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | R_Small | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | Resistor1, Resistor2, Resistor4 |
| 1 | ESP32_DevKit_V1_DOIT | esp32:esp32_devkit_v1_doit | ESPcontroller1 |
| 1 | Joystick | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | U1 |
| 1 | R | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R1 |
| 1 | R_Potentiometer | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | Weponspeed1 |
| 1 | SW_MEC_5E | Button_Switch_THT:SW_Push_2P1T_Toggle_CK_PVA1xxH4xxxxxxV2 | Start/stop_wepon1 |
| 1 | SW_MEC_5E | Button_Switch_THT:SW_Push_2P1T_Toggle_CK_PVA1xxH3xxxxxxV2 | Stop/start_robot1 |
The 9 most common of 11 parts.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
It measures 72 × 57.5 mm and has 2 copper layers, 1.6 mm thick.
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Elp03/MakeRobotwars2023 repository on GitHub, at the commit this page was made from: the board is controller/controller.kicad_pcb and its schematic controller/controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Elp03 before reusing the design.