Skip to the content
2 layers19.8 × 13.5 mmQuadOpamp INA DIP8 Rg18, the printed circuit board in 3D

QuadOpamp INA DIP8 Rg18

EliMattingly22/QuadOpAmpINA

A PCB to adapt a quad opamp package to a standard (Rg, pins 1-8) INA DIP package

Size
19.8 × 13.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
15
Pads
47
Tracks, vias
105, 37
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
9 Jan 2022
Updated
11 Jan 2022

Overview

QuadOpamp INA DIP8 Rg18 is an open-source printed circuit board by EliMattingly22, from the EliMattingly22/QuadOpAmpINA repository on GitHub, published under the MIT licence. It is a 2-layer board of 19.8 × 13.5 mm with 15 parts on 15 nets, routed with 105 tracks and 37 vias.

It is built around the TL084. Its parts include 8 resistors, 2 capacitors, 1 IC and 1 connector.

Main components

1

README

README.md

QuadOpAmpINA

A PCB to adapt a quad opamp package to a standard (Rg, pins 1-8) INA DIP package

Parts

15
QtyValueFootprintReferences
810kResistor_SMD:R_0805_2012MetricR1, R2, R3, R4, R5, R6, R7, R8
2CCapacitor_SMD:C_0805_2012MetricC1, C2
1Conn_02x04_Counter_ClockwisePackage_DIP:DIP-8_W7.62mmJ1
1MountingHole_PadMountingHole:MountingHole_2.2mm_M2_DIN965_PadH1
1RResistor_SMD:R_0805_2012MetricRG1
1SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1
1TL084Package_SO:TSSOP-14_4.4x5mm_P0.65mmU1

Similar boards

  • 2 layers97.7 × 58 mmBluepill function generator, the printed circuit board in 3D

    Bluepill function generator

    BojanSof/BluePillWaveGen

    DDS function generator build around STM32 BluePill board

    41 parts35
  • 2 layers61 × 61 mmStm32-rfid clone, the printed circuit board in 3D

    Stm32-rfid clone

    joeferner/stm32-rfid-clone

    STM32 RFID Reader / Writer

    112 parts16
  • 2 layers94.5 × 55 mmAdsr 1, the printed circuit board in 3D

    Adsr 1

    hermflink/3310ADSR

    Dual ADSR based on AS3310

    54 parts11GPL-3.0
  • 2 layers105 × 65 mmOsc 3340, the printed circuit board in 3D

    Osc 3340

    petegaggs/MIDI-to-CV

    arduino based MIDI to CV converter

    81 parts9MIT
  • 2 layers78 × 108 mmEuclid+ Main Board, the printed circuit board in 3D

    Euclid+ Main Board

    m0xpd/EUCLIDplus

    EUCLID+ is a Clock Divider, Oscillator and Rhythm Sequencer for electronic music applications

    131 parts7CC-BY-SA-4.0
  • 2 layers450 × 160 mmSquale, the printed circuit board in 3D

    Squale

    jfdelnero/Apollo_7_Squale

    Apollo 7 Squale computer dev tools

    219 parts6
  • 2 layers36.6 × 77.4 mmLicht, the printed circuit board in 3D

    Licht

    microresearch/ERD-breath

    Divinatory smoke and fire based eurorack module.

    41 parts6
  • 2 layers99.1 × 66 mmAgatSpeechBoard, the printed circuit board in 3D

    AgatSpeechBoard

    sintech/AgatSpeechBoard

    КР1803ВЖ1 (TMS5100) based speech synthesizer for Agat computer

    31 parts5MIT

Questions

How big is the QuadOpamp INA DIP8 Rg18 PCB?

It measures 19.8 × 13.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the QuadOpamp INA DIP8 Rg18 use?

15 parts, built around the TL084. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the QuadOpamp INA DIP8 Rg18 KiCad files?

From the EliMattingly22/QuadOpAmpINA repository on GitHub, at the commit this page was made from: the board is QuadOpamp-INA_DIP8_Rg18/QuadOpamp-INA_DIP8_Rg18.kicad_pcb and its schematic QuadOpamp-INA_DIP8_Rg18/QuadOpamp-INA_DIP8_Rg18.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the QuadOpamp INA DIP8 Rg18 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).