2 layers38 × 26.8 mm
2 layers27.4 × 60 mm
Electrium Mobility W25 Remote Control Project
- Size
- 27.4 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 76
- Nets
- 60
- Pads
- 302
- Tracks, vias
- 371, 144
- Pours
- 233
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Jan 2025
- Updated
- 24 Apr 2025
Overview
RC W25 is an open-source printed circuit board by Electrium-Mobility, from the Electrium-Mobility/RC-W25 repository on GitHub. It is a 2-layer board of 27.4 × 60 mm with 76 parts on 60 nets, routed with 371 tracks and 144 vias.
It is built around the ESP32-C6-MINI-1-N4, TPS63020 and CL05B104KO5NNN, with the RT0402BRD0710KL, RT0402BRD07300RL and CL10A106KQ8NNN among its other parts. Its parts include 23 resistors, 20 capacitors, 8 diodes, 3 ICs and 1 transistor. It belongs with the ESP32 and RISC-V boards of this library.
Main components
12
ESP32-C6-MINI-1-N4
SMD-53P-106dBm -40℃~+85℃ 2.4GHz 21dBm 354mA 3V~3.6V 71mA ESP32-C6FH4 Integrated Bluetooth function、Integrated Zigbee function On-board PCB Antenna UART、SPI、I2C、GPIO、I2S SMD-53P WiFi Modules ROHSEspressif SystemsWiFi ModulesTPS63020
UncategorisedTexas Instruments
CL05B104KO5NNN
0402100nF 16V X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT
RT0402BRD0710KL
0402-55℃~+155℃ 10kΩ 50V 62.5mW Thin Film Resistor ±0.1% ±25ppm/℃ 0402 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountRT0402BRD07300RL
0402-55℃~+155℃ 300Ω 50V 63mW Thin Film Resistor ±0.1% ±25ppm/℃ 0402 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface Mount
CL10A106KQ8NNN
060310uF 6.3V X5R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTAR02BTC4701
0402-55℃~+155℃ 25V 4.7kΩ 62.5mW Thin Film Resistor ±0.1% ±25ppm/℃ 0402 Chip Resistor - Surface Mount ROHSViking TechChip Resistor - Surface Mount
RCLAMP0521P-N
DFN1006-20.4pF 16V 3.5A@8/20us 500nA 5V 60W@8/20us 6V Bidirectional IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Single-channel TVS DFN1006-2 ESD and Surge Protection (TVS/ESD) ROHSBORNESD And Surge Protection (TVS/ESD)CL05A475MP5NRN
040210V 4.7uF X5R ±20% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTRN731ETTP3162B25
0402-55℃~+155℃ 31.6kΩ 63mW Thin Film Resistor ±0.1% ±25ppm/℃ 0402 Chip Resistor - Surface Mount ROHSKOA Speer ElectronicsChip Resistor - Surface MountCL05A225MQ5NSN
04022.2uF 6.3V X5R ±20% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTERA2AEB512X
0402-55℃~+155℃ 5.1kΩ 50V 63mW Thin Film Resistor ±0.1% ±25ppm/℃ 0402 Chip Resistor - Surface Mount ROHSPanasonicChip Resistor - Surface Mount
README
README.mdRC-W25
Electrium Mobility W25 Remote Control Project
Parts
76| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | TEST POINT | TestPoint:TestPoint_Pad_2.0x2.0mm | +3.3V, +USBV, +VBAT, FB, JOYSTICK, MOTOR, SCL, SDA |
| 6 | 100nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5, C6, C7, C9, C19, C20 |
| 6 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7, R8, R20, R21, R22, R23 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R13, R14, R17 |
| 3 | 22uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15, C16, C17 |
| 3 | 300 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R9, R10, R11 |
| 3 | 4.7k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R3, R4 |
| 3 | 6V TVS | Diode_SMD:D_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D1, D2, D3 |
| 2 | 10uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C18 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C12 |
| 2 | 1M | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R15, R19 |
| 2 | 2.2uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C4 |
| 2 | 4.7uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C10 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R5, R6 |
| 2 | Button | footprints:Box Tactile Button Switch | MODE, ON/OFF |
| 2 | Button | footprints:SW-SMD_L3.9-W3.0-P4.45 | BOOT, RESET |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | 1.5uH | footprints:L_Abracon_ASPI-4030S | L1 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13 |
| 1 | 180k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R16 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C14 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 3.7k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R18 |
| 1 | 390k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 5k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R12 |
| 1 | BQ25185 | footprints:WSON-10 BQ25185 | U2 |
| 1 | D_Schottky | Diode_SMD:D_SOD-123 | D8 |
| 1 | ESP32-C6-MINI-1 | RF_Module:ESP32-C6-MINI-1 | U1 |
| 1 | FPC 30P | footprints:FPC-30P-0.5mm | DS1 |
| 1 | GLED | Diode_SMD:D_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D6 |
| 1 | JOYSTICK | footprints:Joystick Potentiometer Pads | JOYSTICK |
| 1 | JST CONN | footprints:CONN-SMD_2P-P2.00_XUNPU_WAFER-PH2.0-2PWB | BATTERY |
| 1 | LOGO | LOGO | G*** |
| 1 | MOTOR | footprints:Motor Pads | MOTOR |
| 1 | NMOS | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | ORLED | Diode_SMD:D_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D5 |
| 1 | RLED | Diode_SMD:D_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D4 |
| 1 | TPS63020 | footprints:TPS63020_VSON(14) | U3 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | ZENER 5V | Diode_SMD:D_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D7 |
More from Electrium-Mobility/RC-W25
1Similar boards
- 2 layers70 × 71 mm
Jewelled lc1
matthiasnowak/jewelled
This is a panel meant for production of the Earrings, allowing for 2 Earrings per panel.
148 parts3 - 4 layers80 × 60 mm
Winglet Carrier
TL-Embedded/Winglet-Carrier
This is a development board to faciliate testing of the winglet modems.
69 parts - 6 layers147 × 90 mm
- 2 layers20 × 38.5 mm
Arm tiny pcb
Chicken-Fried/STM32-NanoCortex
Ultra-compact USB-C development board powered by STM32F042 (ARM Cortex-M0) with native DFU, ceramic-only LDO power stage & CaveRover branding.
29 partsCERN-OHL-S-2.0 - 4 layers70.9 × 70.1 mm
Wear Camera
kitnol/Camera_project
(See the README.md file in the upper level 'examples' directory for more information about examples.)
75 parts - 4 layers104 × 69.4 mm
- 4 layers24 × 116 mm
- 2 layers88.9 × 50.8 mm
Business card
maribu/business-card
A PCB based business card using open hardware and free software
131 parts13
Questions
How big is the RC W25 PCB?
It measures 27.4 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RC W25 use?
76 parts, built around the ESP32-C6-MINI-1-N4, TPS63020, CL05B104KO5NNN and RT0402BRD0710KL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RC W25 KiCad files?
From the Electrium-Mobility/RC-W25 repository on GitHub, at the commit this page was made from: the board is remote/RC-W25.kicad_pcb and its schematic receiver/receiver/reciever.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RC W25 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Electrium-Mobility before reusing the design.