
ESP32 Transmitter and Receiver
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Resistor Panel is an open-source printed circuit board by Electric-Circuits-and-Devices, from the Electric-Circuits-and-Devices/Resistor_Panel repository on GitHub, published under the MIT licence. It is a 2-layer board of 94 × 82 mm with 48 parts on 32 nets, routed with 48 tracks and 0 vias.
Its parts include 32 connectors and 16 resistors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | Conn_01x01_Socket | MountingHole:MountingHole_2.5mm_Pad | J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1 +16 |
| 16 | R | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1 |

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing



softerhardware/Hermes-Lite2
A second generation low-cost amateur HF software defined radio transceiver.

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

loxodes/vna
Under development open hardware microwave vector network analyzer

fellesverkstedet/fabricatable-machines
Motion systems for flexible digital fabrication and research. Easy to fabricate and customize. Documentation: https://github.com/fellesverkstedet/fabricatable-machines/wiki
It measures 94 × 82 mm and has 2 copper layers, 1.6 mm thick.
48 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Electric-Circuits-and-Devices/Resistor_Panel repository on GitHub, at the commit this page was made from: the board is Resistor_Panel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).