Skip to the content
2 layers45 × 20 mmStatus LED, the printed circuit board in 3D

Status LED

ElTinmar/IR_LED

This is an open-source infra-red illumnination solution (LED panel and driver) for machine vision. An arduino nano every sits at the core of the driver board, and allows remote control from a PC through serial…

Size
45 × 20 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
5
Pads
15
Tracks, vias
17, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
11 Jun 2026
Updated
24 Sep 2026

Overview

Status LED is an open-source printed circuit board by ElTinmar, from the ElTinmar/IR_LED repository on GitHub. It is a 2-layer board of 45 × 20 mm with 7 parts on 5 nets, routed with 17 tracks and 0 vias.

Its parts include 4 diodes and 1 connector.

README

README.md

IR_LED

This is an open-source infra-red illumnination solution (LED panel and driver) for machine vision. An arduino nano every sits at the core of the driver board, and allows remote control from a PC through serial communication

The main features are:

  • infra-red LED panel, with 3 separately addressable concentric rings
  • manual or remote control of the brightness for the 3 channels
  • LED driver can be strobed with the open-collector trigger output of a machine vision camera, which significantly reduces heat output
  • the temperature of the LED panel is measured in real time and can by controlled with a fan. The fan PWM can be set manually or via a software PID controller on the arduino

Control Board Schematic

hardware

PCB design files (Kicad v10)

firmware

Arduino code (Arduino Nano Every)

software

Python driver and GUI on the PC side

Parts

7
QtyValueFootprintReferences
4LEDLED_THT:LED_D5.0mmD1, D2, D3, D4
2MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2
1Conn_01x05_PinConnector_Molex:Molex_KK-254_AE-6410-05A_1x05_P2.54mm_VerticalJ1

More from ElTinmar/IR_LED

3
  • 2 layers115 × 75 mmPanel 0, the printed circuit board in 3D

    Panel 0

    ElTinmar/IR_LED

    This is an open-source infra-red illumnination solution (LED panel and driver) for machine vision. An arduino nano every sits at the core of the driver board, and allows remote control from a PC through serial…

    54 parts
  • 2 layers215 × 70 mmControl, the printed circuit board in 3D

    Control

    ElTinmar/IR_LED

    This is an open-source infra-red illumnination solution (LED panel and driver) for machine vision. An arduino nano every sits at the core of the driver board, and allows remote control from a PC through serial…

    49 parts
  • 2 layers34 × 28 mmRotary encoder, the printed circuit board in 3D

    Rotary encoder

    ElTinmar/IR_LED

    This is an open-source infra-red illumnination solution (LED panel and driver) for machine vision. An arduino nano every sits at the core of the driver board, and allows remote control from a PC through serial…

    4 parts

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

How big is the Status LED PCB?

It measures 45 × 20 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Status LED use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Status LED KiCad files?

From the ElTinmar/IR_LED repository on GitHub, at the commit this page was made from: the board is hardware/breakout/status_LED/status_LED.kicad_pcb and its schematic hardware/LED_panel/panel_0/panel_0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Status LED design in my own project?

Its repository states no licence, so its author keeps all rights: ask ElTinmar before reusing the design.