

StarbiePCB
this is my version of the hack club starbie
- Size
- 123 × 116 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 25
- Pads
- 60
- Tracks, vias
- 63, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 9 Oct 2026
- Updated
- 25 Oct 2026
Overview
StarbiePCB is an open-source printed circuit board by ElDragonMC, from the ElDragonMC/My-Starbie repository on GitHub. It is a 2-layer board of 123 × 116 mm with 9 parts on 25 nets, routed with 63 tracks and 0 vias.
It is built around the DHT11. Its parts include 2 ICs, 2 connectors, 2 switches and 1 resistor. It belongs with the ESP32 and RISC-V boards of this library.
Main components
1README
README.mdMy Starbie
This is my version of the Hack Club starbie
I liked and i wanted to make this project becouse it implies a PCB (i like designing them, sometimes i design ramdom things to spend some time) but i don't know how to code on arduino so i did not costumize the code a lot, only the main character). I loved to design and make this PCB, i've never thinked i could make a "tamagotchi" but i loved this.
PCB Schematic
Some PCB Renders:
Front:
Back:
Bill Of Materials
| Part | What it's for | Qty | Unit | Total | Vendor |
|---|---|---|---|---|---|
| XIAO ESP32-C3 | Main Processor | 1 | $10.63 | $10.63 | Aliexpress ES |
| x10 Switches | Buttons | 1 | $2.83 | $2.83 | Aliexpress ES |
| OLED | Main Screen | 1 | $2.34 | $2.34 | Aliexpress ES |
| Aosong DHT11 | Ambient sensor | 1 | $1.02 | $1.02 | Aliexpress ES |
| x50 Resistors | Resistance | 1 | $1.43 | $1.43 | Aliexpress ES |
| MPU6050 | Rotation and Velocity sensor | 1 | $2.07 | $2.07 | Aliexpress ES |
| PCB | Main circuit (it's so cheap beacouse i used a 10$ coupon) | 1 | $1.95 | $1.95 | JLCPCB |
| Parts subtotal | — | — | — | $22.27 | — |
| Tax & shipping | — | — | — | $0.00 | — |
| Total | — | — | — | $22.27 | — |
Desing Process
I designed the PCB with KiCad (the only PCB design software i know to use) following the guide from HackClub. The code i've grabbed it from the guide and i changed the main character to a yoda.
I waned to design a case for this project but i did not have that much time left and also i think the sleek black PCB will look very cool.
How to assemble
- First grab the PCB and verify if it's cleen and well-made.
- Grab the ESP32, the screen and the motion sensor and weld the headers. For the ESP32, two 7 pin header, for the motion sensor, a 8 pin header and the screen a 4 pin header.
- Weld the ESP32, the screen, the motion sensor, the DHT sensor, the resistance and the two switches to the PCB.
- Print and put the keycaps.
How to upload the firmware
-
Open the Arduino IDE
-
Open File → Preferences. In Additional Boards Manager URLs, add:
text https://espressif.github.io/arduino-esp32/package_esp32_index.json -
Open Tools → Board → Boards Manager, search for esp32, and install esp32 by Espressif Systems.
-
Under Tools → Board → esp32, select XIAO_ESP32C3.
-
Open Sketch → Include Library → Manage Libraries. Install these libraries one at a time:
- Adafruit GFX Library
- Adafruit SSD1306
- Adafruit MPU6050
- DHT sensor library
If Arduino asks to install dependencies, choose Install All.
-
Connect the ESP32 to the computer.
-
Open Starbie.ino and click Arduino's arrow-shaped Upload button to upload the firmware to the board.
Controls
| Control | What it does |
|---|---|
| Button 1, first press | Opens the radial menu |
| Tilt while menu is open | Moves the selector ball; each general direction is one large sector |
| Button 1, second press | Chooses the highlighted action |
| Button 2 | Shows or hides the stats screen |
| Shake while seeing the pet | Gives Yoda its shake reaction |
Some ideas i had:
- Add some AAA bateries to power the ESP32 but i would be over budget
- Put more options on the menu but i don't know how to code on arduino and the week is over
- With the ESP32, connect it to a phone through bluetooth so i can get some notifications like feed me or something else but as i said i don't know how to do it
- Put a speaker but it would be over budget and also i don't know how to program on arduino
Update!!
I could reduce the PCB price with a coupon so i could put some batteries but i don't have enough time
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | Conn_01x04_Pin | footprints:Display_128x64_096_I2C | J1 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U1 |
| 1 | LOGO | PCB Cosmetics:Orpheus flag top.kicad_sym | G*** |
| 1 | LOGO | Footprints - Bitmap Images for PCB Cosmetic:Estelada_25mm | ⠀ |
| 1 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | XIAO-ESP32-C3-SMD | footprints:XIAO-ESP32-C6-DIP | U2 |
Similar boards
- 2 layers96.6 × 82.8 mm

- 2 layers100 × 50 mm

Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm

- 2 layers

OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm

SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers

Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm

Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers30.5 × 77.5 mm

Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5
Questions
How big is the StarbiePCB PCB?
It measures 123 × 116 mm and has 2 copper layers, 1.6 mm thick.
What parts does the StarbiePCB use?
9 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the StarbiePCB KiCad files?
From the ElDragonMC/My-Starbie repository on GitHub, at the commit this page was made from: the board is PCB KiCad Files/StarbiePCB.kicad_pcb and its schematic PCB KiCad Files/StarbiePCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the StarbiePCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask ElDragonMC before reusing the design.