2 layers100 × 100 mm
2 layers100 × 100 mm
XOver colonne top
ElBabar/CrossOver_600_5000Crossover system for HiFi speakers
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 9
- Pads
- 22
- Tracks, vias
- 82, 33
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 8 Dec 2017
- Updated
- 8 Dec 2017
Overview
XOver colonne top is an open-source printed circuit board by ElBabar, from the ElBabar/CrossOver_600_5000 repository on GitHub. It is a 2-layer board of 100 × 100 mm with 16 parts on 9 nets, routed with 82 tracks and 33 vias.
Its parts include 12 connectors, 2 ICs and 1 inductor. It belongs with the audio and music boards of this library.
README
README.mdCrossOver_600_5000
Crossover system for HiFi speakers
Output 1 : Band pass 600Hz 1st order / 5000Hz 4th order
Output 2 : High pass 5000Hz 4th order
the circuit was designed on 2 PCBs because manufacturing costs for boards over 10x10cm are way more expensive.
You might need to use my library: add https://github.com/ElBabar/Libabar.git to your KiCad paths.
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Bridge1 | Libabar:XOver_c_BRidge | J6 |
| 1 | Bridge2 | Libabar:XOver_c_BRidge | J7 |
| 1 | C1 | Libabar:XOver_c_C1 | J3 |
| 1 | C2 | Libabar:XOver_c_C2 | J4 |
| 1 | C3 | Libabar:XOver_c_C3 | J5 |
| 1 | C4 | Libabar:XOver_c_C4 | J8 |
| 1 | CH1 | Libabar:XOver_c_CH1 | J1 |
| 1 | CH2 | Libabar:XOver_c_CH2 | J2 |
| 1 | HIGH+ | Libabar:XOver_c_Solder | J9 |
| 1 | HIGH- | Libabar:XOver_c_Solder | J10 |
| 1 | L | Libabar:XOver_c_L4 | L1 |
| 1 | LOGO | Breakdown1-6:breakdown1-6 | G*** |
| 1 | LOW+ | Libabar:XOver_c_Solder | J12 |
| 1 | LOW- | Libabar:XOver_c_Solder | J11 |
| 1 | XOver_c_L2 | Libabar:XOver_c_L2 | U2 |
| 1 | XOver_c_L3 | Libabar:XOver_c_L3 | U1 |
More from ElBabar/CrossOver_600_5000
1Similar boards
- 2 layers140.5 × 30 mm
Type e
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
16 parts3kApache-2.0 - 2 layers41.4 × 14.5 mm
U2f zero
conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style
16 parts2.4k - 2 layers77.5 × 33.7 mm
Breakout 72pin 1123038-2-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
16 parts1.2k - 2 layers122 × 37 mm
V0-UmbilicalBoard
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
16 parts1.1kGPL-3.0 - 2 layers152 × 57.6 mm
Videoslotadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
16 parts1kGPL-3.0 - 2 layers36 × 63.4 mm
Smart ringfinal layout
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
16 parts915 - 2 layers60 × 40 mm
- 2 layers21.1 × 26.9 mm
Questions
How big is the XOver colonne top PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the XOver colonne top use?
16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the XOver colonne top KiCad files?
From the ElBabar/CrossOver_600_5000 repository on GitHub, at the commit this page was made from: the board is XOver_colonne_top/XOver_colonne_top.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the XOver colonne top design in my own project?
Its repository states no licence, so its author keeps all rights: ask ElBabar before reusing the design.