Skip to the content
4 layers85.9 × 82 mmBalloonMotherboardV4, the printed circuit board in 3D

BalloonMotherboardV4

EggiEl/SpiCy-BEXUS1

Cyanobacteria are among the oldest and most efficient photosynthetic organisms on planet Earth. They contribute 25% of the oxygen on Earth today and were crucial in forming our atmosphere in the early stages of Earth's…

Size
85.9 × 82 mm
Copper layers
4
Thickness
1.6 mm
Parts
283
Nets
195
Pads
845
Tracks, vias
1,481, 480
Pours
42
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
27 Feb 2024
Updated
2 Dec 2025

Overview

BalloonMotherboardV4 is an open-source printed circuit board by EggiEl, from the EggiEl/SpiCy-BEXUS repository on GitHub. It is a 4-layer board of 85.9 × 82 mm with 283 parts on 195 nets, routed with 1,481 tracks and 480 vias.

It is built around the LM2904AVQDRQ1, ITS4200S-ME-O and APTD2012LCGCK, with the RBR2LB60BTBR1, ABM8G-12.000MHZ-4Y-T3 and APTD2012LSURCK among its other parts. Its parts include 85 resistors, 77 capacitors, 9 fuses, 5 diodes and 2 inductors.

Main components

9

README

README.md

SpiCy-BEXUS

Please take a look at the wiki for documentation of electrical and software.

About

This is the official GitHub repository of the SpiCy-BEXUS team, dedicated to code sharing and documentation for our project.

Image 1 Image 2 Image 3
Image 4 Image 5 Image 6
Image 7 RexBex Logo RexBex Logo

Project Overview

SpiCy (Stratospheric investigation of combinatory cyanobacterial biofilms) is a student-led mission to investigate the behavior of combinatory cyanobacterial biofilms under increased ionizing and non-ionizing radiation levels in the stratosphere to propose new alternatives of oxygen suppliance during space travel missions.

Cyanobacteria are among the oldest and most efficient photosynthetic organisms on planet Earth. They contribute 25% of the oxygen on Earth today and were crucial in forming our atmosphere in the early stages of Earth's development through oxygenation. As they are mostly aquatic or at least, need a certain degree of humidity, heterotrophic bacteria as a biofilm coordinator to mitigate their dependency are incorporated. These biofilms are a promising candidate in a plethora of space-related research (i.e. medicinal, life). Through forming adhesive biofilms, the bacteria are more resilient to radiation, thermal shocks, mechanical tearing and dry environments.

Project SpiCy intends to capitalize on the cyanobacterial ability to produce oxygen with minimum requirements and research their viability in long-term oxygen generation for human space flight and colonization missions.

This github documents the technical side of things.

Contact Us

Take a look at our Website

Setup

Node

https://nodejs.org/en/download

MongoDB Community Server:

https://www.mongodb.com/try/download/community

How to setup Project after cloning:

In the root of the Project use:

text
pip install -r requirements.txt
npm install

Parts

283
QtyValueFootprintReferences
26LOGOLOGOG***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** +10
220.1uCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC14, C15, C22, C23, C24, C25, C29, C30, C31, C32, C33, C34, C35, C38, C46, C50 +6
115.1kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR27, R29, R33, R39, R40, R42, R44, R50, R51, R52, R54
10100Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR61, R62, R84, R85, R86, R90, R91, R92, R95, R96
104.7kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR16, R17, R18, R19, R20, R21, R22, R23, R55, R57
910kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR9, R15, R41, R53, R60, R75, R76, R77, R78
9MF-FSML100_8-2SamacSys_Parts:FUSC1608X70NF0, F1, F2, F3, F4, F5, F6, F7, F8
80.22u (grob)Capacitor_SMD:C_0402_1005MetricC67, C68, C69, C71, C73, C74, C76, C77
810uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC0, C1, C2, C4, C5, C6, C9, C44
8ITS4200S-ME-OSamacSys_Parts:SOT230P700X170-4NH0, H1, H2, H3, H4, H5, H6, H7
7502352-0400SamacSys_Parts:5023520400GPIO0, GPIO1, GPIO2, GPIO3, H1-0, Ox0, RS-0
61kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR6, R10, R24, R48, R49, R56
6SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP3, JP4, JP5, JP6, JP7, JP8
6SolderJumper_3_OpenJumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabelsJP0, JP1, JP2, JP9, JPVOX0, JPVOX1
50RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR64, R65, R66, R68, R73
52u2Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC21, C36, C37, C39, C62
5TestPointTestPoint:TestPoint_Pad_D1.0mmTP0, TP1, TP2, TP3, TP4
449R9 1%Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR67, R69, R70, R71
4MountingHoleMountingHole:MountingHole_2.2mm_M2_Pad_ViaH0_M0, H1_M0, H2_M0, H3_M0
30.1uFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC26, C40, C43
31MResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR7, R12, R74
3270Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR30, R37, R45
3680Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR4, R32, R47
3APTD2012LCGCKSamacSys_Parts:LEDC2012X120N5sys0, bat0, uC0
3DNPCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC10, C11, C20
3DNPCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC16, C41, C42
3Jumper_3_Bridged12Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabelsJH0, JH1, JH2
3NCP1117ST33T3GSamacSys_Parts:SOT230P700X180-4NLRlan0, LRre0, LRuC0
3RBR2LB60BTBR1SamacSys_Parts:DIOM5336X245ND0, D1, D2
20Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R13
20.1uCapacitor_SMD:C_0402_1005MetricC66, C70
210nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC48, C57
210uF/16VCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC47, C56
215p 5%Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC27, C28
218pCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC61, C65
21uCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC7, C45
2220Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR31, R46
222uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC17, C18
227Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR34, R35
2330Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR79, R80
24,7kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR58, R59
24.7uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC3, C49
2435441019830SamacSys_Parts:435441019830S_BOOT0, S_RES0
2502352-1210SamacSys_Parts:5023521210H3-0, NTCs0
26.8nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC58, C59
2Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalBuckJmp0, JB_or_U0
2LM4040BIM3-3.0_NOPBSamacSys_Parts:SOT95P237X112-3NVref0, Vref1
2StatusLEDSamacSys_Parts:LTRBR37G4R4S01250LED0, LED1
2TestPoint_ProbeTestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_BeadedTPGND0, TPGND1
10.1u/30VCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC12
10.1u/30V DNPCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC75
1100kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR8
110R 1%Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR72
110k but unessesaryResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR25
110u/30VCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC8
112.4k 1%Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR63
112kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR0
1150Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR36
11500Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR5
11k 1%Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR28
11mOhmSamacSys_Parts:RESC3216X90NR_shunt0
11nF/200VCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC64
11u/30V DNPCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC72
122nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC60
133nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC13
1502352-0200SamacSys_Parts:5023520200V_BAT0
16,5kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR43
164.9kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR14
1693072010801SamacSys_Parts:693072010801SD0
174439346068SamacSys_Parts:74439346068L1
1ABM8G-12.000MHZ-4Y-T3SamacSys_Parts:ABM8GY0
1APTD2012LSURCKSamacSys_Parts:LEDM2012X120N!bat0
1BLM18SP102SZ1DSamacSys_Parts:BLM18SP221SN1BFB0
1DNPResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR11
1ECS-250-6-33B2-CTP-TRSamacSys_Parts:ECS250633B2CTPTRY1
1GSB1C41110SSHRSamacSys_Parts:GSB1C41110SSHRUSB_C0
1InstaLogoSamacSys_Parts:instaL0
1J1B1211CCDSamacSys_Parts:J1B1211CCDJ1
1LM2904AVQDRQ1SamacSys_Parts:SOIC127P600X175-8NOP0
1LOGOSamacSys_Parts:LogoG***

The 270 most common of 283 parts.

More from EggiEl/SpiCy-BEXUS

3
  • 4 layers97.3 × 82 mmBalloonMotherboardV4.1, the printed circuit board in 3D

    BalloonMotherboardV4.1

    EggiEl/SpiCy-BEXUS

    Cyanobacteria are among the oldest and most efficient photosynthetic organisms on planet Earth. They contribute 25% of the oxygen on Earth today and were crucial in forming our atmosphere in the early stages of Earth's…

    256 parts1
  • 4 layers123.8 × 76.2 mmBalloonMotherboardV3, the printed circuit board in 3D

    BalloonMotherboardV3

    EggiEl/SpiCy-BEXUS

    Cyanobacteria are among the oldest and most efficient photosynthetic organisms on planet Earth. They contribute 25% of the oxygen on Earth today and were crucial in forming our atmosphere in the early stages of Earth's…

    198 parts1
  • 2 layers25.6 × 17.8 mmInrush current limiter, the printed circuit board in 3D

    Inrush current limiter

    EggiEl/SpiCy-BEXUS

    Cyanobacteria are among the oldest and most efficient photosynthetic organisms on planet Earth. They contribute 25% of the oxygen on Earth today and were crucial in forming our atmosphere in the early stages of Earth's…

    8 parts1

Similar boards

  • 2 layers57.5 × 78.3 mmDroneV2, the printed circuit board in 3D

    DroneV2

    Flynsky/RP2040-Drone

    A simple Quadrocoper based on the RP2040

    100 parts
  • 2 layers125 × 145 mmMPPT, the printed circuit board in 3D

    MPPT

    lhr-solar/Power-Generation-Sunscatter

    The current maintainer of this project is Matthew Yu as of 07/16/2023. His email is matthewjkyu@gmail.com.

    134 parts
  • 4 layers155 × 106 mmBodyController 01, the printed circuit board in 3D

    BodyController 01

    Voltworks-Garage/Hardware

    Hardware repo for all PCBA design

    416 partsGPL-3.0
  • 2 layers112 × 47 mmInitial Build, the printed circuit board in 3D

    Initial Build

    nfernoedge/Badge-Preprototype

    34 parts3
  • 2 layers70 × 59.7 mmMyMachine LED cap, the printed circuit board in 3D

    MyMachine LED cap

    BrnoMarsRover/myMachine-LED-cap

    Repository for my Machine LED Cap project, including software, PCBs, and documentation.

    58 partsMIT
  • 6 layers32 × 20 mmWire Free DAQ, the printed circuit board in 3D

    Wire Free DAQ

    Aharoni-Lab/Miniscope-Wire-Free-DAQ

    All information, guides, and tutorials can be found on the Miniscope-Wire-Free-DAQ Wiki Page .

    126 parts5

Questions

How big is the BalloonMotherboardV4 PCB?

It measures 85.9 × 82 mm and has 4 copper layers, 1.6 mm thick.

What parts does the BalloonMotherboardV4 use?

283 parts, built around the LM2904AVQDRQ1, ITS4200S-ME-O, APTD2012LCGCK and RBR2LB60BTBR1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BalloonMotherboardV4 KiCad files?

From the EggiEl/SpiCy-BEXUS repository on GitHub, at the commit this page was made from: the board is motherboard/Hardware/old designs/MotherboardV4/BalloonMotherboardV4.kicad_pcb and its schematic motherboard/Hardware/Inrush_current_limiter/Inrush_current_limiter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the BalloonMotherboardV4 design in my own project?

Its repository states no licence, so its author keeps all rights: ask EggiEl before reusing the design.