

Placa de sensores
Para mais detalhes sobre o projeto, acesse a documentação.
- Size
- 80 × 32.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 18
- Pads
- 61
- Tracks, vias
- 101, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 29 Sep 2024
- Updated
- 12 Dec 2024
Overview
Placa de sensores is an open-source printed circuit board by EduardoTejada, from the EduardoTejada/EA076_BitDogSegue repository on GitHub. It is a 2-layer board of 80 × 32.3 mm with 21 parts on 18 nets, routed with 101 tracks and 0 vias.
It is built around the QRD1114 and ADS1115. Its parts include 10 resistors and 4 ICs.
Main components
2README
README.mdBitDogSegue
Sobre o projeto
O BitDogSegue é um robô seguidor de linha usando a placa BitDogLab como base e é fruto dos esforços realizados na disciplina EA076 - Laboratório de Sistemas Embarcados, ministrada na Unicamp pelo professor Fabiano Fruett. Desenvolvido pelos alunos Eduardo Pereira e José Braga, esse robô foi desenvolvido visando aprimorar os conhecimentos em eletrônica e programação (hardware e _software) de estudantes e entusiastas nessa área.
Para mais detalhes sobre o projeto, acesse a documentação.
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4, R9, R10 |
| 4 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R5, R6 |
| 4 | QRD1114 | QRD2:ONS_QRD1114 | U1, U2, U3, U4 |
| 2 | 5K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8 |
| 1 | ADS1115 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | ADS1115 |
| 1 | CONEXÃO I2C | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | CONEXÃO-I2C1 |
| 1 | INA122_D | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | INA122 |
| 1 | INA122_E | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | INA122_E1 |
| 1 | LOGO | logo_feec:logo_novo_feec | G*** |
| 1 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | RG |
| 1 | ~ | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | ANA_OUT |
Similar boards
- 2 layers114.3 × 86.4 mm

- 2 layers142.6 × 85.1 mm

LineFollower Speedy-
Club-robotica-UDLSB/LineFollower-Speedy-
Documentación del desarrollo del Seguidor de línea (El speedy)
89 partsGPL-3.0 - 2 layers24.8 × 23.7 mm

- 2 layers168.9 × 123.3 mm

OEM ECU
aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware
Volvo MKII Open Hardware
296 parts161CC0-1.0 - 2 layers94 × 79 mm

- 2 layers54.6 × 33 mm

JuntekOnSteroidsTTGO
rin67630/Drok-Juntek-on-steroids
Extend the possibilities of cheap digital power supplies with a WiFi module
35 parts62 - 2 layers155 × 70 mm

Payphone v1
sdylewski/Analog-Redial
A circuit board for old telephones to come back to life. Plug one or two phones in, and you can call the other phone, use bluetooth, connect to others via voip, and do a variety of other things with a plain old rotary…
137 parts46 - 2 layers32.4 × 33 mm

Questions
How big is the Placa de sensores PCB?
It measures 80 × 32.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Placa de sensores use?
21 parts, built around the QRD1114 and ADS1115. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Placa de sensores KiCad files?
From the EduardoTejada/EA076_BitDogSegue repository on GitHub, at the commit this page was made from: the board is Placa de sensores/placa_de_sensores.kicad_pcb and its schematic Placa de sensores/placa_de_sensores.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Placa de sensores design in my own project?
Its repository states no licence, so its author keeps all rights: ask EduardoTejada before reusing the design.