
Vcf as3320 lpf v1
EchelonForce/vcf_as3320_lp
This is a design for a eurorack low pass VCF using the AS3320 VCF chip.

This is a design for a eurorack low pass VCF using the AS3320 VCF chip.
Vcf as3320 lpf v1 panelized is an open-source printed circuit board by EchelonForce, from the EchelonForce/vcf_as3320_lp repository on GitHub. It is a 2-layer board of 76 × 100 mm with 174 parts on 60 nets, routed with 716 tracks and 12 vias.
It is built around the LM358, TL072 and AS3320. Its parts include 60 resistors, 42 capacitors, 10 ICs, 8 diodes and 6 connectors. It belongs with the audio and music boards of this library.
This is a design for a eurorack low pass VCF using the AS3320 VCF chip.
Full writeup here: https://www.robotdialogs.com/2022/09/eurorack-vcf-module-low-pass-filter.html
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. https://creativecommons.org/licenses/by-nc-sa/4.0/
| Qty | Value | Footprint | References |
|---|---|---|---|
| 42 | 100k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R1, R10, R10, R13, R13, R15, R15, R16, R16, R17, R17, R18, R18, R19, R19 +26 |
| 20 | 10nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C1, C2, C2, C3, C3, C4, C4, C10, C10, C11, C11, C19, C19, C21, C21 +4 |
| 14 | 75k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | RC2, RC2, RC3, RC3, RC4, RC4, RF1, RF1, RF2, RF2, RF3, RF3, RF4, RF4 |
| 8 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8, R8, R9, R9, R11, R11, R12, R12 |
| 8 | 1N4001 | Diode_THT:D_A-405_P2.54mm_Vertical_KathodeUp | D1, D1, D2, D2, D3, D3, D4, D4 |
| 8 | 300pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9, C9, C12, C12, C13, C13, C14, C14 |
| 6 | 180k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | RB1, RB1, RB2, RB2, RB3, RB3 |
| 6 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R4, R14, R14, R27, R27 |
| 4 | 100K | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RRC_TRIM1, RRC_TRIM1, RRI_TRIM1, RRI_TRIM1 |
| 4 | 100k | My Stuff:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical_w_3d | R_FREQ1, R_FREQ1, R_RES1, R_RES1 |
| 4 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C5, C5, C6, C6 |
| 4 | 15K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | RRC1, RRC1, RRI1, RRI1 |
| 4 | 1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C17, C17, C18, C18 |
| 4 | 3k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R21, R21, R22, R22 |
| 4 | FerriteBead | Inductor_THT:L_Axial_L6.6mm_D2.7mm_P2.54mm_Vertical_Vishay_IM-2 | FB1, FB1, FB2, FB2 |
| 4 | LM358 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U1, U1, U5, U5 |
| 2 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C16, C16 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C15, C15 |
| 2 | 270 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | REE1, REE1 |
| 2 | 330nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C20, C20 |
| 2 | AS3320 | Package_DIP:DIP-18_W7.62mm_Socket_LongPads | U3, U3 |
| 2 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J1, J1 |
| 2 | FREQ | My Stuff:Jack_3.5mm_MJ-355W_Vertical | J_FREQ1, J_FREQ1 |
| 2 | IN1 | My Stuff:Jack_3.5mm_MJ-355W_Vertical | J4, J4 |
| 2 | LM79L05_TO92 | Package_TO_SOT_THT:TO-92_Inline_Wide | U4, U4 |
| 2 | Logo_Open_Hardware_Small | Symbol:OSHW-Symbol_6.7x6mm_SilkScreen | LOGO3, LOGO3 |
| 2 | OUT_2 | My Stuff:Jack_3.5mm_MJ-355W_Vertical | J5, J5 |
| 2 | RES | My Stuff:Jack_3.5mm_MJ-355W_Vertical | J_RES1, J_RES1 |
| 2 | TL072 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U2, U2 |
| 2 | logo1 | My Stuff:Logo2 | LOGO2, LOGO2 |
| 2 | logo1 | My Stuff:Logo1 | LOGO1, LOGO1 |

EchelonForce/vcf_as3320_lp
This is a design for a eurorack low pass VCF using the AS3320 VCF chip.



jdotw/OpInst-Bass-1
Three-voice analog synth with a digital control surface using CEM3340, AS3320 and similar discrete analog components.


patricecolet/synth
Atelier synthé analogique : cartes KiCad, firmwares Arduino/Teensy, interfaces Pure Data. Interface MIDI/CV pour RSF Kobol Expander.


EchelonForce/vclfo10
A Eurorack LFO design based on the Electric Druid VCLFO10 chip.

EchelonForce/poly_envelope_pcb
A polyphonic envelope eurorack module design, in KiCAD.
It measures 76 × 100 mm and has 2 copper layers, 1.6 mm thick.
174 parts, built around the LM358, TL072 and AS3320. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the EchelonForce/vcf_as3320_lp repository on GitHub, at the commit this page was made from: the board is vcf_as3320_lpf_v1/vcf_as3320_lpf_v1_panelized.kicad_pcb and its schematic vcf_as3320_lpf_v1/vcf_as3320_lpf_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask EchelonForce before reusing the design.