
T5Cad
ECE411T5/Practicum
Portland State University. Electrical and Computer Engineering Department. ECE 411 Practicum Project

Portland State University. Electrical and Computer Engineering Department. ECE 411 Practicum Project
T5Cad is an open-source printed circuit board by ECE411T5, from the ECE411T5/Practicum repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100.5 × 56.1 mm with 42 parts on 44 nets, routed with 369 tracks and 0 vias.
It is built around the ATMEGA328P-PU. Its parts include 9 capacitors, 5 resistors, 3 connectors, 2 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Portland State University. Electrical and Computer Engineering Department. ECE 411 Practicum Project
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | Testpoint | Keyless_Door:P1-13 | TP1, TP2, TP3, TP4, TP5 |
| 4 | 100n | Keyless_Door:C0805K | C3, C4, C5, C10 |
| 4 | STAND-OFF | Keyless_Door:STAND-OFF | H1, H2, H3, H4 |
| 2 | 100u | Keyless_Door:C0805K | C7, C9 |
| 2 | 10K | Keyless_Door:R0805 | R1, R4 |
| 2 | 1K | Keyless_Door:R0805 | R2, R3 |
| 2 | 30p | Keyless_Door:C0805K | C1, C2 |
| 2 | PINHD-1X4 | Keyless_Door:1X04 | JP3, JP4 |
| 1 | Keyless_Door:SMB | D2 | |
| 1 | Keyless_Door:2X03 | J1 | |
| 1 | Keyless_Door:CHIP-LED0805 | D1 | |
| 1 | Keyless_Door:POWER_JACK_PTH | J2 | |
| 1 | Keyless_Door:1X06 | J3 | |
| 1 | !Reset | Keyless_Door:TACTILE_SWITCH_SMD | SW1 |
| 1 | 10u | Keyless_Door:C0805K | C6 |
| 1 | 1A+ & 2A- | Keyless_Door:1X02 | JP9 |
| 1 | 1k | Keyless_Door:R0805 | R6 |
| 1 | 1x4 Pin Conn. | Keyless_Door:1X04 | JP1 |
| 1 | 2B+ & 1B- | Keyless_Door:1X02 | JP8 |
| 1 | A4988_STEPPER_MOTOR_DRIVER_CARRIER | Keyless_Door:MODULE_A4988_STEPPER_MOTOR_DRIVER_CARRIER | U8 |
| 1 | ATMEGA328P-PU | Keyless_Door:DIL28-3 | U4 |
| 1 | COM | NO | Keyless_Door:1X02 | JP5 |
| 1 | Crystal | Keyless_Door:HC49UP | Y1 |
| 1 | IN- & IN+ | Keyless_Door:1X02 | JP6 |
| 1 | OUT- & OUT+ | Keyless_Door:1X02 | JP7 |
| 1 | Open | Keyless_Door:TACTILE_SWITCH_SMD | SW2 |
| 1 | VCC.1 | IN1 | GND | Keyless_Door:1X03 | JP2 |

ECE411T5/Practicum
Portland State University. Electrical and Computer Engineering Department. ECE 411 Practicum Project

ECE411T5/Practicum
Portland State University. Electrical and Computer Engineering Department. ECE 411 Practicum Project

ECE411T5/Practicum
Portland State University. Electrical and Computer Engineering Department. ECE 411 Practicum Project

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

coseyfannitutti/discipad
17-key numpad assembled with only through hole components, including usb type-c

matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

coseyfannitutti/romeo
Staggered 40% keyboard pcb that can be assembled with only through hole components, including USB Type-C

mattybrad/drumkid
Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.


leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

It measures 100.5 × 56.1 mm and has 2 copper layers, 1.6 mm thick.
42 parts, built around the ATMEGA328P-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ECE411T5/Practicum repository on GitHub, at the commit this page was made from: the board is Z - CAD perfection is a million versions away/Final Iterations Nov 14/1- Iteration 1/T5Cad.kicad_pcb and its schematic 0 - Final CAD V2.3.1/2 - Actual_CAD_Files/T5Cad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).