
Motherboard
gabrielyoung92/gabs_microSMT_PickAndPlace
Independent reorganisation of MicroSMT feeder and PNPv3 files, previews and documentation, with upstream attribution and ChatGPT assistance.

Smoothie VBB control is an open-source printed circuit board by Duckle29, from the Duckle29/Smoothie-VBB-control repository on GitHub. It is a 2-layer board of 43.2 × 18.4 mm with 6 parts on 4 nets, routed with 44 tracks and 0 vias.
It is built around the AOT240L. Its parts include 3 connectors, 1 resistor, 1 diode and 1 transistor.
A small board, meant to switch the VBB rail on a smoothieboard, to allow the board to cut the power to stepper motors and heaters
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10k | Resistors_SMD:R_0603_HandSoldering | R1 |
| 1 | 1N4007 | Diodes_SMD:SMA_Handsoldering | D1 |
| 1 | AOT240L | TO_SOT_Packages_THT:TO-220_Neutral123_Horizontal_Reverse_LargePads | Q1 |
| 1 | CONN_01X01 | Pin_Headers:Pin_Header_Straight_1x01 | P3 |
| 1 | CONN_01X02 | Connectors:FCI_20020107-2p | P1 |
| 1 | CONN_01X03 | Connectors:FCI_20020107-3p | P2 |

gabrielyoung92/gabs_microSMT_PickAndPlace
Independent reorganisation of MicroSMT feeder and PNPv3 files, previews and documentation, with upstream attribution and ChatGPT assistance.

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.


Jcparkyn/dpoint
Open-source digital stylus using camera tracking and inertial measurements

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
It measures 43.2 × 18.4 mm and has 2 copper layers, 1.6 mm thick.
6 parts, built around the AOT240L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Duckle29/Smoothie-VBB-control repository on GitHub, at the commit this page was made from: the board is rev1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Duckle29 before reusing the design.