2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0
2 layers230.5 × 170 mm
Esp32 hitbox v1.0.0
DuRuofu/ESP32_HitBox- Size
- 230.5 × 170 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 84
- Pads
- 182
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 19 May 2024
- Updated
- 20 May 2024
Overview
Esp32 hitbox v1.0.0 is an open-source printed circuit board by DuRuofu, from the DuRuofu/ESP32_HitBox repository on GitHub. It is a 2-layer board of 230.5 × 170 mm with 14 parts on 84 nets.
It belongs with the ESP32 boards of this library.
README
README.md基于ESP32的hitbox
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | ~ | DuRuofu_Switch:热插拔键盘轴(RGB反贴)(30mm) | U1, U2, U3, U4, U5, U6, U7, U8, U9, U10, U11, U12, U13, U14 |
Similar boards
- 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
Questions
How big is the Esp32 hitbox v1.0.0 PCB?
It measures 230.5 × 170 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp32 hitbox v1.0.0 use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32 hitbox v1.0.0 KiCad files?
From the DuRuofu/ESP32_HitBox repository on GitHub, at the commit this page was made from: the board is hardware/PCB/esp32_hitbox_v1.0.0/esp32_hitbox_v1.0.0.kicad_pcb and its schematic hardware/PCB/esp32_hitbox_v1.0.0/esp32_hitbox_v1.0.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32 hitbox v1.0.0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask DuRuofu before reusing the design.