
SPI to MW Adapter
Droid-MAX/SPI_to_MW_Adapter
25 Series SPI Flash to 93c Series Microwire EEPROM ISP Adapter for CH341A Programmer.

25 Series SPI Flash to 93c Series Microwire EEPROM ISP Adapter for CH341A Programmer.
SPI to MW Adapter is an open-source printed circuit board by Droid-MAX, from the Droid-MAX/SPI_to_MW_Adapter repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 10.7 × 10.9 mm with 4 parts on 10 nets, routed with 35 tracks and 2 vias.
Its parts include 2 resistors and 2 ICs. It belongs with the interfaces and adapters boards of this library.
25 Series SPI Flash to 93c Series Microwire EEPROM ISP Adapter for CH341A Programmer.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 4.7K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2 |
| 1 | EEPROM-93C-SOIC-8 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | SPI-25-SOIC-8 | Package_DIP:DIP-8_W7.62mm_Socket | U2 |

Droid-MAX/SPI_to_MW_Adapter
25 Series SPI Flash to 93c Series Microwire EEPROM ISP Adapter for CH341A Programmer.

Droid-MAX/SPI_to_MW_Adapter
25 Series SPI Flash to 93c Series Microwire EEPROM ISP Adapter for CH341A Programmer.

joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

osy/XG_Mobile_Station
Open source eGPU dock for ROG Ally and ROG Flow

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
It measures 10.7 × 10.9 mm and has 2 copper layers, 1.6 mm thick.
4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Droid-MAX/SPI_to_MW_Adapter repository on GitHub, at the commit this page was made from: the board is v1_1/SPI_to_MW_Adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).