
Fz1 oled IDC adapter
Dreambrother7/FZ1oledlc
DIY OLED display replacement for Casio FZ-1, FZ-10 and FZ-20 using Raspberry Pi Pico and SSD1309 OLED; related VZ support planned.

DIY OLED display replacement for Casio FZ-1, FZ-10 and FZ-20 using Raspberry Pi Pico and SSD1309 OLED; related VZ support planned.
Pico FZ1 OLED PCB is an open-source printed circuit board by Dreambrother7, from the Dreambrother7/FZ1oledlc repository on GitHub, published under the MIT licence. It is a 2-layer board of 71.1 × 120 mm with 47 parts on 60 nets, routed with 91 tracks and 0 vias.
Its parts include 14 resistors, 2 connectors and 1 IC. It belongs with the lEDs and displays boards and the RP2040 boards of this library.
This folder contains Deftaudio's FZ-1 IDC connector adapter PCB design for the Pico OLED installation.
fz1_oled_IDC_adapter.kicad_pro - KiCad project.fz1_oled_IDC_adapter.kicad_sch - KiCad schematic.fz1_oled_IDC_adapter.kicad_pcb - KiCad PCB layout.fz1_oled_IDC_adapter_v2_gerbers.zip - Ready-to-upload Gerber/drill package for PCB manufacture.export1.0/ - Loose Gerber and drill files.libs/ - Local KiCad symbol/footprint support files included with the project.Upload fz1_oled_IDC_adapter_v2_gerbers.zip to a PCB manufacturer such as PCBWay or a similar service.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | mylib:MountingHole_3mm | , , , , , , , , , | |
| 7 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4, R6, R8, R10, R12, R14 |
| 7 | 2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R5, R7, R9, R11, R13 |
| 1 | 2x5 Header | Connector_PinHeader_2.00mm:PinHeader_2x05_P2.00mm_Vertical | J2 |
| 1 | Pico | Module:RaspberryPi_Pico_Common_Unspecified | U1 |
| 1 | SSD1309 OLED | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
The 27 most common of 47 parts.

Dreambrother7/FZ1oledlc
DIY OLED display replacement for Casio FZ-1, FZ-10 and FZ-20 using Raspberry Pi Pico and SSD1309 OLED; related VZ support planned.



VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!




FrameworkComputer/InputModules
Reference designs and documentation for the Input Module system in the Framework Laptop 16
It measures 71.1 × 120 mm and has 2 copper layers, 1.6 mm thick.
47 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Dreambrother7/FZ1oledlc repository on GitHub, at the commit this page was made from: the board is pcb/deftaudio_pico_oled/Pico_FZ1_OLED_PCB.kicad_pcb and its schematic pcb/deftaudio_connector_adapters/fz10m_fz20m_vz10m_oled_IDC_adapter/fz10_oled_IDC_adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).