

Mint36tt rev02
A split keyboard
- Size
- 232.4 × 84.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 82
- Nets
- 38
- Pads
- 430
- Tracks, vias
- 475, 53
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 Dec 2024
- Updated
- 3 Feb 2025
Overview
Mint36tt rev02 is an open-source printed circuit board by DrMint, from the DrMint/mint36tt repository on GitHub. It is a 2-layer board of 232.4 × 84.7 mm with 82 parts on 38 nets, routed with 475 tracks and 53 vias.
It belongs with the keyboards and input boards of this library.
README
README.mdMint36tt (provisional name)

Design goals
-
Ergonomic
- Split
- Reduced number of keys
- Reduced key spacing
- Splay
-
On-the-go
- Low profile
- Silent
- Small footprint
- key protection
- Light
- USB-C
-
Sourceable
- Open source hardware
- 3D printable (FDM)
- Common components
- Hot swappable board and switches
- Reasonably cheap

The two halves combines together using magnets to transform into its own carry case. This prevent damage to the keys during transport and protect the keyboard from dust.
Physical sizes for one half:
Width: 118.5mm
Height: 90.5mm
Thickness: 14.8mm
Weight: 110g (wired version)
Switches
Kailh Choc switches are the thinnest at 11mm (ref. https://www.reddit.com/r/MechanicalKeyboards/comments/165c11v/the_biggest_issue_with_lowprofile_switches_they/).
There are thinner switches such as the Kailh Notebook X (6.5mm) or the Cherry MX Ultra low-profile (3.5mm). But these are more expensive and don't have much variety.
Choosen switches: Kailh Choc Ambient Silent
Key caps
Chocs standard keycaps are 16.5mm × 17.5mm. I decided to go with 16.5mm × 16.5mm CBX keycaps from Chosfox, which results in a 17.5mm spacing (a ~15% area reduction compared to MX's 19mm spacing).
It's possible to buy 15mm keycaps for a 16mm spacing (~30% area reduction). That would be the smallest possible spacing when paired with Chocs as 15mm is already the size of the switches.
It's also possible to reduce the gap beween keys. The standard is 1mm, but it could possibly be reduced to 0.5mm if the switches have little to no wobble and the tolerances on other parts are top notch.
Choosen caps: CFX caps
Microcontroller
Choosen microcontroller: Seeed Studio XIAO RP2040 or Seeed Studio XIAO nRF52840 for wireless.
Shopping list

Common for either version
- Left and right PCBs
- 4 × 7 pin headers
- 36 × 1N4148W SOD123 diodes
- 36 × Chocfox CFX caps, including:
- 30 × 1U Chocfox CFX caps
- 2 × 1.25U Chocfox CFX caps
- 4 × 1.5U Chocfox CFX caps
- 36 × Kailh Choc switches
- 36 × Kailh Choc Hot Swap Sockets
- 1 × USB-C cable
Specific for the wireless version
- 2 × Seeed Studio XIAO nRF52840
- 2 × 601818 LiPo 3.7V 170mAh (18mm × 20mm × 6mm)
- 2 × MSK12C02 on/off slide switch
Specific for the wired version
- 2 × Seeed Studio XIAO RP2040
- 1 × TRRS cable
- 2 × TRRS jacks PCB mount (MJ-4PP-9 or PJ320A)
With the case (recommended):
- Left and right upper cases
- Left and right lower cases
- Left and right plates (optional)
- 8 × N52 neodymium magnet (cylinder-shaped, Ø 5mm × 5mm) (recommended)
- 20 × M2 countersunk screws (Ø 2mm × 5mm)
- 10 × M2 standoffs (Ø 2mm × 9mm)
Parts
82| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | PG1350 | , , , , , , , , , , , , , , , +20 | |
| 36 | SOD-123 | , , , , , , , , , , , , , , , +20 | |
| 2 | MJ-4PP-9_1side | , | |
| 2 | 601818 | , | |
| 2 | JSP-2pin | , | |
| 2 | MSK12C02 | , | |
| 2 | XIAO-nRF52840 | , |
More from DrMint/mint36tt
1- 2 layers112.7 × 84.7 mm

Similar boards
- 2 layers68 × 55.4 mm

- 2 layers271.8 × 78.7 mm

PCPI AppliCard
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.
82 parts446 - 2 layers57.2 × 60.3 mm

- 2 layers35.6 × 33 mm

Axp209 breakout
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
82 parts253GPL-3.0 - 2 layers65 × 40 mm

Mdb slave esp32s3-sim7080g
nodestark/mdb-esp32-cashless
ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT
82 parts190MIT - 2 layers83.5 × 66 mm

Open ed Rev.B
krikzz/open-ed
Open-ED is a very simple and cheap open source Genesis/Megadrive cartridge. The cartridge does not have its own processor or FPGA, it is built in the old school style using only memory and discrete logic.
82 parts169MIT - 2 layers46.3 × 90.7 mm

- 2 layers97.1 × 97 mm

Questions
How big is the Mint36tt rev02 PCB?
It measures 232.4 × 84.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mint36tt rev02 use?
82 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mint36tt rev02 KiCad files?
From the DrMint/mint36tt repository on GitHub, at the commit this page was made from: the board is PCB/kicad/mint36tt_rev02.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mint36tt rev02 design in my own project?
Its repository states no licence, so its author keeps all rights: ask DrMint before reusing the design.