
GPS MINPOINT
cecilsmith/GPS-MINPOINT
This is the project folder for a Spring 2024 EE2361 Final Project.

Custom built PIC24-based, handheld, programmable, game console with a 128x128 OLED, dual analog joysticks, and four built-in games (Pong, Ackanoid, 2.5D Maze raycaster, Dinosaur Runner). Firmware in C, hardware in KiCad.
Handheld Gaming Device is an open-source printed circuit board by DonovanBrenny, from the DonovanBrenny/Handheld_Gaming_Device repository on GitHub, published under the MIT licence. It is a 2-layer board of 153.7 × 94.2 mm with 25 parts on 40 nets, routed with 214 tracks and 18 vias.
It is built around the PIC24FJ64GA002-I/SP. Its parts include 8 capacitors, 6 connectors, 5 resistors, 2 switches and 1 IC. It belongs with the keyboards and input and retro computing and games boards and the PIC boards of this library.
A PIC24FJ64GA002 handheld game console with a 128x128 OLED, dual analog joysticks, and four built-in games. Firmware in C, hardware in KiCad.
MPLAB X IDE + XC16 compiler. Open the .X folder as a project, build, and
flash with a PICkit (or equivalent) via the ICSP header.
KiCad schematic and PCB live in hardware/. Built around a PIC24FJ64GA002
(28-pin DIP), an SH1107-class 128x128 OLED on SPI1, two analog joysticks,
two pushbuttons, and an NPN-driven piezo speaker. Pin assignments are in
Setup.c.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C3, C7 |
| 3 | 10uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C6, C8 |
| 2 | 10 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Bourns_3386P_Vertical | RV1 |
| 1 | 10nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C4 |
| 1 | 1uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C5 |
| 1 | 2N2219 | Package_TO_SOT_THT:TO-39-3 | Q1 |
| 1 | Blue Button | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | Left Joystick | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J3 |
| 1 | OLED | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | PIC24FJ64GA002-I/SP | Package_DIP:DIP-28_W7.62mm | U1 |
| 1 | Red Button | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | Right Joystick | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J2 |
| 1 | SNAP Programmer | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | Speaker | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | LS1 |
| 1 | USB input | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J5 |
| 1 | Voltage Regulator | Package_TO_SOT_THT:TO-220-3_Vertical | J6 |

cecilsmith/GPS-MINPOINT
This is the project folder for a Spring 2024 EE2361 Final Project.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

xyphro/UsbGpib
Versatile, cheap and portable USB to GPIB converter (USBTMC class based)


jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.
It measures 153.7 × 94.2 mm and has 2 copper layers, 1.6 mm thick.
25 parts, built around the PIC24FJ64GA002-I/SP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DonovanBrenny/Handheld_Gaming_Device repository on GitHub, at the commit this page was made from: the board is hardware/Handheld-Gaming-Device.kicad_pcb and its schematic hardware/Handheld-Gaming-Device.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).