

Gruppe1-Index3
motor-control | power-electronics | kicad | atmega328p | ir2104 | irfz44n | pwm | embedded-systems | simulink | gate-driver
- Size
- 130 × 93 mm
- Copper layers
- 2
- Thickness
- 1.67 mm
- Parts
- 55
- Nets
- 49
- Pads
- 179
- Tracks, vias
- 228, 81
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 6 Apr 2026
- Updated
- 18 Oct 2026
Overview
Gruppe1-Index3 is an open-source printed circuit board by DileepChilla, from the DileepChilla/Electric-Drive-Systems repository on GitHub. It is a 2-layer board of 130 × 93 mm with 55 parts on 49 nets, routed with 228 tracks and 81 vias.
It is built around the IR2104PBF, LM358 and L7812CV, with the MBR2045CT and SMBJ33A among its other parts. Its parts include 17 capacitors, 13 resistors, 10 connectors, 8 diodes and 3 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5IR2104PBF
PDIP-8-40℃~+125℃ 100ns 10V~20V 130mA 150ns 150uA 2 270mA 50ns 680ns Enable shutdown、Interleaved conduction protection、Dead-time control Half-Bridge IGBT、MOSFET PDIP-8 Gate Drivers ROHSInfineon TechnologiesGate DriversLM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierL7812CV
TO-2200℃~+125℃@(Tj) 1 12V 1A 25V 2V@(1A) 60dB@(120Hz) 8mA Fixed Over Current Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMBR2045CT
TO-220AB-3-50℃~+125℃ 1 Pair Common Cathode 150A 1mA@45V 20A 45V 550mV@10A TO-220AB-3 Schottky Diodes ROHSMDDSchottky DiodesSMBJ33A
DO-214AA(SMB)-55℃~+150℃ 11.26A@10/1000us 33V 40.6V 53.3V 5uA 600W@10/1000us IEC 61000-4-2 TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)
README
README.mdwhz-game-agent
Capture The Flag agent for the WHZ joint module Software Project (ELT10210) and Autonomous Research Project (KFT11050). Team: Dileep, Dinesh. Period: 19.10.2026 to January Last Week 2027.
What this is
Two agents play Capture The Flag on a grid. Our agent is a C++ DLL that the course program host.exe loads. Each round the host calls Agent_Step with a 5x5 view and the last action; the agent returns one action.
The software part builds the agent, a local test harness and tests. The research part compares a few strategies against two baselines .
Status
| Milestone | Date | State |
|---|---|---|
| M0 plan v0.1 presented | 23.10.2026 | in preparation |
| M1 specification and evaluation protocol | 13.11.2026 | planned |
| M2 design, harness, baselines measured | 27.11.2026 | planned |
| M3 agent v1 integrated | 11.12.2026 | planned |
| M4 pilot results, v2 freeze | 25.12.2026 | planned |
| M5 experiments complete | 08.01.2027 | planned |
| M6 final delivery | 22.01.2027 | planned |
Update this table at every milestone. Details: docs/project_plan.md.
Repository layout
Exists today: agent/ (first agent and API header), docs/, DEVLOG.md.
Planned, created when the work package starts:
agent/include/agent_api.h the only copy of the API header (version 1.0, 2026-10-09), do not edit
agent/src/ explore, path, map, localize, flag_fsm, enemy, interface block
baselines/ b0_random.cpp, b1_first_agent.cpp
probes/ small agents that log what the host does
sim/ local harness ctfsim and maps/
tests/
results/ pilot/ and main/ as CSV
docs/ plan, spec, design, research plan, evaluation protocol
scripts/ build.bat, run_tests.bat, run_batch.bat
dist/ release DLLs, only at milestone tagsToolchain
- Windows, MSYS2 with g++ on the PATH (used since 14.10.2026). Record the exact
g++ --versionhere once confirmed:TODO. - The course host:
host.exefrom Week_02_HostAndAgent (agent API version 1.0).
Build and run
Build one agent DLL (command from the course sample; replace first_agent with the file name):
g++ -c first_agent.cpp
g++ -o first_agent.dll first_agent.o -shared -Wl,--subsystem,windowsRun against another agent in the host:
host.exe first_agent.dll stupid_agent.dllor drag and drop both DLLs onto the host window.
Build the DLL in the same folder as the agent_api.h it includes. A DLL built against an older header (the Week 1 one) compiles to nothing the host can use, and the host window closes at once.
scripts/build.bat will replace these commands in work package S3.
How to reproduce results
Planned for M5: scripts/run_batch.bat regenerates every CSV in results/ from a clean checkout with fixed seeds. Until then no results are claimed.
Working rules
mainalways builds. Work on branches namedwp-<id>-<topic>(ids from the work package table indocs/project_plan.md). The other person reviews every merge.- One DEVLOG entry per work session: date, who, what, why, decision, open question. Say when AI assistance was used.
- Tag each milestone
m1tom6; final tagv1.0. - Do not delete and recreate the repository.
Documents
docs/project_plan.md: definition, requirements, roles, schedule, risksdocs/research_plan.md: research questions, literature, strategies, metricsdocs/presentation_5min.md: script for the Gantt presentationDEVLOG.md: developer diary
Parts
55| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100uF 50V | Capacitor_SMD:CP_Elec_10x10.5 | C12, C13, C14, C15, C16, C17, C18 |
| 4 | 100nF X7R | Capacitor_SMD:C_1206_3216Metric | C6, C7, C9, C19 |
| 3 | 1kΩ | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R7, R8 |
| 3 | 330Ω | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11, R12, R13 |
| 3 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5, J6, J7 |
| 3 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D6, D7, D8 |
| 2 | 10kΩ | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R5 |
| 2 | 10Ω | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4 |
| 2 | 1µF | Capacitor_SMD:C_1206_3216Metric | C8, C10 |
| 2 | Q_NMOS_GDS | Package_TO_SOT_SMD:TO-263-3_TabPin2 | Q1, Q2 |
| 2 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-3-5.0-H_1x03_P5.00mm_Horizontal | J1, J2 |
| 1 | 100nF | Capacitor_SMD:C_1206_3216Metric | C11 |
| 1 | 100Ω | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10 |
| 1 | 10mΩ 3W | Resistor_THT:R_Axial_Power_L20.0mm_W6.4mm_P25.40mm | R6 |
| 1 | 10uF 25V | Capacitor_SMD:C_1206_3216Metric | C5 |
| 1 | 15A T | Fuse:Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F1 |
| 1 | 15kΩ | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9 |
| 1 | 1uF 50V X7R | Capacitor_SMD:C_1206_3216Metric | C20 |
| 1 | 330nF X7R | Capacitor_SMD:C_1206_3216Metric | C4 |
| 1 | 5.1V | Diode_SMD:D_MiniMELF_Handsoldering | D5 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | BAS 16J | Diode_SMD:D_SOD-323F | D3 |
| 1 | BTN_ON | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J9 |
| 1 | IR2104 | Package_DIP:DIP-8_W7.62mm | U3 |
| 1 | L7812CV | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | LED Green | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | LM2596_MODULE | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | LM358 | Package_DIP:DIP-8_W7.62mm | U2 |
| 1 | MBR2045CT | Package_TO_SOT_SMD:TO-263-3_TabPin2 | D4 |
| 1 | Motor | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | OLED Display 0.96" (SSD1306 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | SMBJ33A | Diode_SMD:D_SMA-SMB_Universal_Handsoldering | D1 |
Similar boards
- 2 layers49 × 39.1 mm

- 4 layers106.5 × 91 mm

Robodev power
juleswwebb/portfolio
A static engineering portfolio for https://juleswwebb.github.io/portfolio/.
49 parts - 4 layers110 × 80 mm

- 2 layers67.3 × 99.1 mm

- 2 layers145 × 115 mm

Tail lights
chrskly/electric-mustang-wiring
Wiring diagrams and PCBs for my Mustang EV conversion project
123 parts2 - 2 layers174.2 × 124 mm

- 2 layers145 × 115.1 mm

Tail lights
chrskly/electric-mustang-taillights
This is a project to create a PCB to replace the original tail light lamps in a 1965 Ford Mustang.
127 parts - 2 layers249.3 × 63.5 mm

Questions
How big is the Gruppe1-Index3 PCB?
It measures 130 × 93 mm and has 2 copper layers, 1.67 mm thick.
What parts does the Gruppe1-Index3 use?
55 parts, built around the IR2104PBF, LM358, L7812CV and MBR2045CT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gruppe1-Index3 KiCad files?
From the DileepChilla/Electric-Drive-Systems repository on GitHub, at the commit this page was made from: the board is hardware/kicad/Gruppe1-Index3.kicad_pcb and its schematic hardware/kicad/Gruppe1-Index3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gruppe1-Index3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask DileepChilla before reusing the design.