
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

Graduate project is an open-source printed circuit board by Dictor, from the Dictor/RBF-PID-Balbot-circuit repository on GitHub. It is a 2-layer board of 43.2 × 76.2 mm with 32 parts on 48 nets, routed with 343 tracks and 13 vias.
Its parts include 6 capacitors, 5 connectors, 4 resistors, 3 ICs and 2 diodes.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | , , , , , , , , , , , | ||
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C4 |
| 2 | 22n | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 2 | DRV8874PWPR | DRV8874PWPR:SOP65P640X120-17N | U2, U3 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 12k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 2.4k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | GY-9250 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | HM-10 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | LED_ERR | LED_THT:LED_D3.0mm | D1 |
| 1 | LED_RUN | LED_THT:LED_D3.0mm | D2 |
| 1 | Left Motor | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J4 |
| 1 | NUCLEO-L432KC | NUCLEO-L432KCsym:MODULE_NUCLEO-L432KC | U1 |
| 1 | Power | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | J1 |
| 1 | Right Motor | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J5 |

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


octosavvi/ESPKey
Wiegand data logger, replay device and micro door-controller

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

swharden/AVR-projects
A collection of standalone AVR projects written in C

hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain
It measures 43.2 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
32 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Dictor/RBF-PID-Balbot-circuit repository on GitHub, at the commit this page was made from: the board is kicad/graduate-project.kicad_pcb and its schematic kicad/graduate-project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Dictor before reusing the design.