2 layers40 × 20 mm
2 layers76.2 × 76.2 mm
CameraSlider
Der-Kai-T/CameraSlider- Size
- 76.2 × 76.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 47
- Pads
- 88
- Tracks, vias
- 109, 3
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 14 Nov 2024
- Updated
- 14 Nov 2024
Overview
CameraSlider is an open-source printed circuit board by Der-Kai-T, from the Der-Kai-T/CameraSlider repository on GitHub. It is a 2-layer board of 76.2 × 76.2 mm with 13 parts on 47 nets, routed with 109 tracks and 3 vias.
Its parts include 5 connectors, 3 capacitors, 2 resistors and 1 IC. It belongs with the ESP32 boards of this library.
README
README.mdCameraSlider
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
| 2 | C | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C2, C3 |
| 1 | C | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 1 | ESP32 Dev-Kit | Custom Library:ESP32-USBC-DevBoard | U1 |
| 1 | Logic | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Rotation | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Slide | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Slide_Switch | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Stepper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Stepper Driver Rotation | Module:Pololu_Breakout-16_15.2x20.3mm | A2 |
| 1 | Stepper Driver Slider | Module:Pololu_Breakout-16_15.2x20.3mm | A1 |
Similar boards
- 2 layers74.9 × 49.5 mm
- 2 layers35 × 29 mm
MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm
AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm
- 2 layers95 × 95 mm
Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm
Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0
Questions
How big is the CameraSlider PCB?
It measures 76.2 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CameraSlider use?
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CameraSlider KiCad files?
From the Der-Kai-T/CameraSlider repository on GitHub, at the commit this page was made from: the board is CameraSlider.kicad_pcb and its schematic CameraSlider.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CameraSlider design in my own project?
Its repository states no licence, so its author keeps all rights: ask Der-Kai-T before reusing the design.