2 layers66.4 × 48.1 mm
Protoboard
Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!
358 parts456
2 layers98.8 × 72.3 mm
ProtoPropDuo
DepartmentOfAlchemy/ProtoPropDuoBreakout board allowing a Raspberry Pi Pico to interface with up to two FeatherWing boards.
- Size
- 98.8 × 72.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 358
- Nets
- 56
- Pads
- 636
- Tracks, vias
- 734, 65
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 Jun 2023
- Updated
- 16 Dec 2023
Overview
ProtoPropDuo is an open-source printed circuit board by DepartmentOfAlchemy, from the DepartmentOfAlchemy/ProtoPropDuo repository on GitHub. It is a 2-layer board of 98.8 × 72.3 mm with 358 parts on 56 nets, routed with 734 tracks and 65 vias.
Its parts include 165 connectors, 5 resistors, 2 ICs, 1 capacitor and 1 switch. It belongs with the interfaces and adapters and microcontroller boards boards and the RP2040 boards of this library.
README
README.mdProtoPropDuo
Breakout board allowing a Raspberry Pi Pico to interface with up to two FeatherWing boards.
RP2040 Peripheral Usage for Feather Wings
SPI:
- SCK: SPI1 SCK
- MOSI: SPI1 TX
- MISO: SPI1 RX
I2C:
- SDA: I2C1 SDA
- SCL: I2C1 SCL
Parts
358| Qty | Value | Footprint | References |
|---|---|---|---|
| 174 | , , , , , , , , , , , , , , , +158 | ||
| 153 | Conn_01x01 | Department of Alchemy:Grid Hole | J10, J11, J100, J101, J102, J103, J104, J105, J107, J108, J109, J110, J110, J110, J110, J110 +137 |
| 5 | 300 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_ISO14580 | H1, H2, H3, H4 |
| 3 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J106, J112, J124 |
| 2 | Adafruit_Feather_Generic | Department of Alchemy:Feather Pins | A1, A2 |
| 2 | Conn_01x20 | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J3, J4 |
| 2 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm | JP2, JP3 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J122 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J121 |
| 1 | Conn_01x04 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J1 |
| 1 | Conn_01x05_Extra_Output | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J123 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J2 |
| 1 | Conn_01x12 | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J6 |
| 1 | Conn_01x16 | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J5 |
| 1 | Pico | Department of Alchemy:RPi_Pico_SMD_TH | U1 |
| 1 | SW_Push | Department of Alchemy:SW_Push_1P1T_NO_RKB2SJK250SMTR LFS | SW2 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1 |
| 1 | ~ | Department of Alchemy:SOP65P640X120-20N | U2 |
The 357 most common of 358 parts.
Similar boards
- 2 layers81.6 × 97.9 mm
Mad hatter main board
the-mad-hatters/defcon2024badge
This badge, crafted by those madder than a hatter and unapologetically heathen, is a concoction of unholy sarcasm, offensive wit, and a dash of undeniable truth.
358 parts3MIT - 2 layers290 × 110 mm
Amp pwr
stockmann-lab/shim_amp_hardware_linear
Hardware related to open-source shim amplifier development for MRI research
358 parts2 - 2 layers298.5 × 139 mm
BareDevRev2
ManoShu/BareDev
ABNT2-based 70% keyboard, with a sandwich case and display stand
358 parts1MIT - 2 layers150 × 110 mm
RF2M
DD1SB/ARDF-TX
Date: 2026-10-15. Engineering review only; unbuilt and unenergized. Open RF80.kicadpro, schematic and native PCB in KiCad10.0.6. Three primary PCBs and the separate VHF true-AM design are unchanged.
358 partsMIT - 2 layers376.2 × 171.5 mm
- 2 layers365 × 140 mm
- 2 layers340.7 × 119.3 mm
Questions
How big is the ProtoPropDuo PCB?
It measures 98.8 × 72.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ProtoPropDuo use?
358 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ProtoPropDuo KiCad files?
From the DepartmentOfAlchemy/ProtoPropDuo repository on GitHub, at the commit this page was made from: the board is board/ProtoPropDuo/ProtoPropDuo.kicad_pcb and its schematic board/ProtoPropDuo/ProtoPropDuo.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ProtoPropDuo design in my own project?
Its repository states no licence, so its author keeps all rights: ask DepartmentOfAlchemy before reusing the design.