
ESP32 Transmitter and Receiver
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

A quick PCB and firmware for a Wack-a-Mole game for the 2023 GNCTR Tech Ex
Gnctr wack a mole pcb is an open-source printed circuit board by DeflateAwning, from the DeflateAwning/gnctr-wack-a-mole repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 213.4 × 101.6 mm with 48 parts on 90 nets, routed with 494 tracks and 46 vias.
Its parts include 15 connectors, 11 switches, 8 resistors, 8 diodes and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
A quick PCB and firmware for a Wack-a-Mole game for the 2023 GNCTR Tech Ex
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11 |
| 8 | 150 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8 |
| 7 | Screw_Terminal_01x06 | TerminalBlock:TerminalBlock_bornier-6_P5.08mm | J2, J3, J11, J12, J14, J16, J17 |
| 4 | MountingHole | MountingHole:MountingHole_4mm | H1, H2, H3, H4 |
| 4 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J4, J9, J10, J13 |
| 3 | Conn_02x04_Row_Letter_Last | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J6, J7, J8 |
| 1 | Arduino_Mega_Header | gnctr-wam-footprints:arduino_mega_header | J1 |
| 1 | ELEGOO_8ch_RelayBoard | gnctr-wam-footprints:elegoo_8ch_relay | U1 |
| 1 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing



softerhardware/Hermes-Lite2
A second generation low-cost amateur HF software defined radio transceiver.

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

loxodes/vna
Under development open hardware microwave vector network analyzer

fellesverkstedet/fabricatable-machines
Motion systems for flexible digital fabrication and research. Easy to fabricate and customize. Documentation: https://github.com/fellesverkstedet/fabricatable-machines/wiki
It measures 213.4 × 101.6 mm and has 2 copper layers, 1.6 mm thick.
48 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DeflateAwning/gnctr-wack-a-mole repository on GitHub, at the commit this page was made from: the board is gnctr-wack-a-mole-pcb/gnctr-wack-a-mole-pcb.kicad_pcb and its schematic gnctr-wack-a-mole-pcb/gnctr-wack-a-mole-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).