
Katia
ikajdan/katia
A split keyboard with 6 by 3 column staggered keys and 3 thumb keys, based on the Crkbrd design

A capacitive touch QMK keyboard, with aspirations of replacing the Framework 13 keyboard
SolidKey-1-PCB is an open-source printed circuit board by DeflateAwning, from the DeflateAwning/SolidKey-1-Keyboard-PCB repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 276.8 × 105 mm with 205 parts on 212 nets, routed with 478 tracks and 1 via.
It is built around the RP2040, W25Q128JVSIQ and ABM8-272-T3. Its parts include 85 resistors, 66 switches, 33 capacitors, 7 ICs and 6 connectors. It belongs with the keyboards and input boards and the RP2040 boards of this library.
A capacitive touch QMK keyboard, with aspirations of replacing the Framework 13 keyboard
The hardware component of this project is licenced under the CERN Open Hardware Licence Version 2 - Weakly Reciprocal licence. Variations must be shared under the same licence (or equivalent) licence. Commercial use is allowed, but the source must be shared, and it must be released/sold under a different name.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 64 | 560 | Resistor_SMD:R_0603_1608Metric | R301, R302, R303, R304, R305, R306, R307, R308, R309, R310, R311, R312, R313, R314, R315, R316 +48 |
| 56 | TouchPoint | SolidKey1_Footprints:KeySwitch1_General | K301, K302, K303, K304, K305, K306, K307, K308, K310, K311, K312, K314, K315, K316, K401, K402 +40 |
| 18 | 100n | Capacitor_SMD:C_0402_1005Metric | C201, C202, C203, C204, C205, C206, C207, C208, C209, C215, C302, C303, C402, C403, C502, C503 +2 |
| 8 | TouchPoint | SolidKey1_Footprints:KeySwitch1_Index | K309, K313, K409, K413, K509, K513, K609, K613 |
| 6 | 1u | Capacitor_SMD:C_0402_1005Metric | C210, C211, C301, C401, C501, C601 |
| 6 | 3k3 | Resistor_SMD:R_0402_1005Metric | R101, R102, RU301, RU401, RU501, RU601 |
| 6 | 5k1 | Resistor_SMD:R_0402_1005Metric | R103, R104, R206, R207, R208, R209 |
| 4 | 0 | Resistor_SMD:R_0603_1608Metric | R105, R106, R701, R702 |
| 4 | 2n2 | Capacitor_SMD:C_0402_1005Metric | C304, C404, C504, C604 |
| 4 | CY8CMBR3116 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U301, U401, U501, U601 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | D201, D202, D203, D204 |
| 3 | 10u | Capacitor_SMD:C_0402_1005Metric | C101, C102, C212 |
| 3 | Jumper_2_Open | SolidKey1_Footprints:SolderJumper-2_P1.3mm_Open_XSilk_RoundedPad1.0x1.5mm | JP705, JP706, JP707 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C213, C214 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R203, R205 |
| 2 | 27.4 | Resistor_SMD:R_0402_1005Metric | R201, R202 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1Left | J201, J203 |
| 2 | Conn_01x10_MountingPin | SolidKey1_Footprints:046809610110846 | J701, J702 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R204 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y201 |
| 1 | BOOT_SEL | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW202 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical_SMD_Pin1Left | J202 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U101 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U201 |
| 1 | RUN/RESET | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW201 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7025 | J101 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U202 |

ikajdan/katia
A split keyboard with 6 by 3 column staggered keys and 3 thumb keys, based on the Crkbrd design

alvarop/swd2usbc
Have you ever wanted to debug your device over USB-C? Sometimes there's not enough room for a JTAG/SWD connector, or even Tag-Connect pads!



pedalboard/pedalboard-hw
pedalboard audio midi processor open hardware



Thinkpad4by3/chibitron
Electrostatic CRT driver designed from the ground up for performance, versatility and ease-of-manufacturability
It measures 276.8 × 105 mm and has 2 copper layers, 1.6 mm thick.
205 parts, built around the RP2040, W25Q128JVSIQ and ABM8-272-T3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DeflateAwning/SolidKey-1-Keyboard-PCB repository on GitHub, at the commit this page was made from: the board is SolidKey-1-PCB/SolidKey-1-PCB.kicad_pcb and its schematic SolidKey-1-PCB/Cap_Sense_16_Channels.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).