Skip to the content
2 layers122 × 31 mmNJD dub siren final version, the printed circuit board in 3D

NJD dub siren final version

DeepFieldAudio/NJD-dub-siren2

All you need to build your own NJD dub siren!

Size
122 × 31 mm
Copper layers
2
Thickness
1.6 mm
Parts
49
Nets
40
Pads
128
Tracks, vias
645, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
27 Aug 2026
Updated
11 Sep 2026

Overview

NJD dub siren final version is an open-source printed circuit board by DeepFieldAudio, from the DeepFieldAudio/NJD-dub-siren repository on GitHub. It is a 2-layer board of 122 × 31 mm with 49 parts on 40 nets, routed with 645 tracks and 0 vias.

It is built around the 2SA1015 and 2SC1815. Its parts include 20 resistors, 6 capacitors, 6 diodes, 6 switches and 4 transistors.

Main components

2

README

README.md

Hello!

All you have here is the work on wich i spent countless hours and that i'm really happy to share with you. If you are about to make your own version of this preamp, please share it Under the same conditions as i did. Also, if you happen to discover mistakes that i made, or ways to improve the design, or you just built your own NJD, then please share it with me and the rest of the world. I would love to see your builds!!

NJD V1 DOC.pdf is the complete documentation, it includes schematic, BOM, details of the pcb, wiring diagram, and a buying list allowing you to directly access a basket at tme.eu. GERBER NJD V1.zip is the file you need to upload on the website of the pcb manufacturer of your choice to get the pcb built. ibom.html is an interactive bom, making it easier to build the pcb you will also find all the kicad files that you can use to make your own mods of the design

contact me at deep field audio on instagram and facebook

this work shall remain open source and free.

Nélo Breuiller

Parts

49
QtyValueFootprintReferences
547kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1, R7, R10, R19, R20
410kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR3, R4, R9, R13
41N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD3, D4, D5, D6
31kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR5, R6, R12
210nCapacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2C5, C6
210µCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC1, C2
2220kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR17, R18
222kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR2, R8
22SA1015Package_TO_SOT_THT:TO-92_Inline_WideQ1, Q2
22SC1815Package_TO_SOT_THT:TO-92_Inline_WideQ3, Q4
233kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR14, R15
2Conn_01x02_PinConnector_Wire:SolderWire-0.15sqmm_1x02_P4mm_D0.5mm_OD1.5mmJ2, J3
2SW_PushConnector_Wire:SolderWire-0.25sqmm_1x02_P4.2mm_D0.65mm_OD1.7mmSW3, SW5
2SW_Rotary3x4library perso:3P4T rotary switchSW1, SW4
1100kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR16
1100nCapacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2C4
1100µCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC3
110kConnector_Wire:SolderWire-0.25sqmm_1x03_P4.2mm_D0.65mm_OD1.7mmRV2
1200k linConnector_Wire:SolderWire-0.25sqmm_1x06_P4.2mm_D0.65mm_OD1.7mmRV1
12k2Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR11
14001Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD2
1LEDLED_THT:LED_D5.0mmD1
1LOGODEEP FIELD AUDIO:DEEP FIELD LOGO (MED)G***
1LOGODEEP FIELD AUDIO:cooperative 15x20G***
1LOGODEEP FIELD AUDIO:guillotine 20x21G***
1SW_SPDTConnector_Wire:SolderWire-0.25sqmm_1x03_P4.2mm_D0.65mm_OD1.7mmSW6
1SW_SPSTConnector_Wire:SolderWire-0.25sqmm_1x02_P4.2mm_D0.65mm_OD1.7mmSW2

Similar boards

  • 2 layers68.7 × 61.7 mmFT232H EPROM WRITER2, the printed circuit board in 3D

    FT232H EPROM WRITER2

    RGBA-CRT/FT232H-EPROM-Prog

    USB EPROM programmer by FTDI-FT232H

    30 parts5MIT
  • 2 layers100 × 75 mmK68-VDG, the printed circuit board in 3D

    K68-VDG

    kuninet/K68-VDG

    48 parts3MIT
  • 2 layers94.9 × 72 mmPCB USB NiMH Charger, the printed circuit board in 3D

    PCB USB NiMH Charger

    k-takata/PCB_USB_NiMH_Charger

    USB NiMH Slow Charger

    45 parts1
  • 2 layers98 × 70 mm16 transistor amp ver3, the printed circuit board in 3D

    16 transistor amp ver3

    Meron3/Building_an_Op-Amp_Using_Transistors

    ICを使わずに、トランジスタで構成されたスピーカーアンプです

    50 parts1MIT
  • 2 layers100 × 75 mmControlPanel, the printed circuit board in 3D

    ControlPanel

    46nori/FMSynthEnsemble

    USB MIDI FM synthesizer that supports voice synthesis using CSM (Composite Sinusoidal Model

    115 partsMIT
  • 2 layers190.5 × 124.5 mmRT08-ProgramBoard, the printed circuit board in 3D

    RT08-ProgramBoard

    7654jp/RT08-ProgramBoard

    Saves programs by SRAM, for RT-08

    293 partsCERN-OHL-P-2.0
  • 2 layers50 × 50 mmEsp32 display2, the printed circuit board in 3D

    Esp32 display2

    caketetu/SPM-ESP2d5OLED-V0

    Simple Programable Module 2.5inchOLEDモジュール

    38 parts
  • 4 layers170 × 150 mmSerrasoid TRX, the printed circuit board in 3D

    Serrasoid TRX

    kazushinjo/Serrasoid_TRX_29M

    29MHz FM 10W transceiver with Serrasoid modulation

    333 partsGPL-3.0

Questions

How big is the NJD dub siren final version PCB?

It measures 122 × 31 mm and has 2 copper layers, 1.6 mm thick.

What parts does the NJD dub siren final version use?

49 parts, built around the 2SA1015 and 2SC1815. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the NJD dub siren final version KiCad files?

From the DeepFieldAudio/NJD-dub-siren repository on GitHub, at the commit this page was made from: the board is NJD dub siren final version.kicad_pcb and its schematic NJD dub siren final version.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the NJD dub siren final version design in my own project?

Its repository states no licence, so its author keeps all rights: ask DeepFieldAudio before reusing the design.