
Protoboard Kradex Z109
DeadBugEngineering/DinRailPrototyping
A collection of information and designs to accelerate the creation of custom electronics that fit into a DIN rail chassis

A collection of information and designs to accelerate the creation of custom electronics that fit into a DIN rail chassis
Protoboard Kradex Z110 is an open-source printed circuit board by DeadBugEngineering, from the DeadBugEngineering/DinRailPrototyping repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 85 mm with 1,093 parts on 54 nets, routed with 24 tracks and 0 vias.
Its parts include 12 switches and 3 connectors.
A collection of information and designs to accelerate the creation of custom electronics that fit into a DIN rail chassis
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1074 | , , , , , , , , , , , , , , , +1058 | ||
| 12 | SW_SPST | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 1 | Terminalblock12 | Connector_Phoenix_GMSTB:PhoenixContact_GMSTBA_2,5_12-G_1x12_P7.50mm_Horizontal | J1 |
| 1 | Terminalblock15 | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_15-G_1x15_P5.00mm_Horizontal | J2 |
| 1 | Terminalblock3 | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_3-G_1x03_P5.00mm_Horizontal | J4 |

DeadBugEngineering/DinRailPrototyping
A collection of information and designs to accelerate the creation of custom electronics that fit into a DIN rail chassis

DeadBugEngineering/DinRailPrototyping
A collection of information and designs to accelerate the creation of custom electronics that fit into a DIN rail chassis

DeadBugEngineering/DinRailPrototyping
A collection of information and designs to accelerate the creation of custom electronics that fit into a DIN rail chassis

DeadBugEngineering/DinRailPrototyping
A collection of information and designs to accelerate the creation of custom electronics that fit into a DIN rail chassis

DeadBugEngineering/DinRailPrototyping
A collection of information and designs to accelerate the creation of custom electronics that fit into a DIN rail chassis


kvoit/WemosD1MiniPerfboard
PCB for a Wemos D1 Mini, with a MP1584 and a SOT-223 regulator UNDER the module, with perfboard around

schilkp/Fets_and_Crosses
An implementation of the classic Tic-Tac-Toe / Knots and Crosses game built with 2458 transistors.


simonyiszk/sem-tanfolyam-stc
STC8G1K08 mikrovezérlős fejlesztőpanel a 2023-as alapozó tanfolyamhoz.

atoomnetmarc/Motivational-Board
Motivational Board, track something year round with RGB-leds and switches.


It measures 100 × 85 mm and has 2 copper layers, 1.6 mm thick.
1,093 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DeadBugEngineering/DinRailPrototyping repository on GitHub, at the commit this page was made from: the board is Protoboard_Kradex_Z110/Protoboard_Kradex_Z110.kicad_pcb and its schematic Protoboard_KradexZ106Z110_CH32V003F4P6_vert/Protoboard_KradexZ106Z110_CH32V003F4P6_vert.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).