
DMH Slew Mk2 PCB Controls
DeMarco/DMH-Slew-Mk2
Second version of my Voltage Controlled Slew Limiter in Kosmo format.

Second version of my Voltage Controlled Slew Limiter in Kosmo format.
DMH Slew Mk2 PCB Main is an open-source printed circuit board by DeMarco, from the DeMarco/DMH-Slew-Mk2 repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 49 × 175 mm with 33 parts on 74 nets, routed with 365 tracks and 0 vias.
It is built around the SB140. Its parts include 23 connectors, 3 capacitors, 2 diodes, 1 resistor and 1 IC. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Second version of my Voltage Controlled Slew Limiter in Kosmo format.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | TS_Jack_6.35mm_Sw | SynthStuff:CUI_SJ-63083D | J1, J2, J3, J4, J5, J6, J7, J8, J9, J10 |
| 4 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J17, J18, J27, J28 |
| 4 | Conn_02x03_Top_Bottom | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J14, J16, J24, J26 |
| 3 | Jumper_3_Bridged12 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1, JP2, JP3 |
| 2 | 47uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C2 |
| 2 | Conn_02x06_Top_Bottom | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Vertical | J15, J25 |
| 2 | SB140 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D3, D4 |
| 1 | 100nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C5 |
| 1 | 470R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R49 |
| 1 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J0 |
| 1 | IDC_02x05 | SynthStuff:IDC-Header_2x05_P2.54mm_Vertical_BackBone | J200 |
| 1 | IDC_02x08 | SynthStuff:IDC-Header_2x08_P2.54mm_Vertical_Eurorack | J100 |
| 1 | LM4040LP-10 | Package_TO_SOT_THT:TO-92_Inline | U10 |

DeMarco/DMH-Slew-Mk2
Second version of my Voltage Controlled Slew Limiter in Kosmo format.


jkuituni/Raven68k
A repository for all the hardware and software development related files for a 68000 based single board computer

etherkit/PartyLine80
A cheap and cheerful 80 meter QRP CW radio made from all discrete components





el-puerro/eater-deluxe
6502-based homebrew computer based on eater.net/6502
It measures 49 × 175 mm and has 2 copper layers, 1.6 mm thick.
33 parts, built around the SB140. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DeMarco/DMH-Slew-Mk2 repository on GitHub, at the commit this page was made from: the board is DMH_Slew_Mk2_PCB_Main/DMH_Slew_Mk2_PCB_Main.kicad_pcb and its schematic DMH_Slew_Mk2_PANEL/DMH_Slew_Mk2_PANEL.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).