

DMH Output PCB Main
Kosmo format output module
- Size
- 49 × 175 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 96
- Nets
- 87
- Pads
- 300
- Tracks, vias
- 688, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 16 Oct 2025
- Updated
- 10 Jul 2026
Overview
DMH Output PCB Main is an open-source printed circuit board by DeMarco, from the DeMarco/DMH-Output repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 49 × 175 mm with 96 parts on 87 nets, routed with 688 tracks and 0 vias.
It is built around the NE5532, TL072 and SB140. Its parts include 32 resistors, 22 capacitors, 22 connectors, 10 diodes and 6 ICs. It belongs with the audio and music boards of this library.
Main components
3NE5532
SOP-8-22V~22V 0℃~+70℃ 100dB 10nA 14mA 2 40V/us 42mA 4mV 800nA 8nV/√Hz@30Hz Built-in compensation SOP-8 Operational Amplifier ROHSSungineOperational AmplifierTL072
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 10V/us 10mV 2 2.5nA 3MHz 85dB SOP-8 Operational Amplifier ROHSGcoreOperational AmplifierSB140
DO-41-65℃~+125℃ 1 Independent 1A 30A 40V 500mV@1A 500uA@40V DO-41 Schottky Diodes ROHSonsemiSchottky Diodes
README
README.mdDMH-Output
Kosmo format output module
Features
Line outputs and main volume
The L and R inputs accept the usual (Eurorack) modular synth audio amplitude of 10 V peak-to-peak. The line level L and R outputs accept both balanced TRS and unbalanced TS cables. The main volume control affects both L and R channels. The reduction factor can be set from from -infinite (silence) to -3 dB (max). Since the usual 10 Vpp amplitude corresponds to around +13 dBu, this means the module can output from -infinite up to +10 dBu. The precision dBu meter will max out at +6 dBu (red LED). Most professional audio equipment like mixers and audio interfaces expect a nominal input line level of +4 dBu.
Headphone output
There's a separate stereo (TRS) headphone driving output with its own volume control, also with a range of -infinite to +10 dBu. It can drive headphones with 32ohms or 85ohms with no problem. Higher impedances are also probably fine.
External instrument inputs
The external inputs can amplify line level signals to the usual Eurorack amplitude of 10 Vpp with the help of a dedicated volume control. The input metering LEDs will turn yellow when the amplified signals at the Euro L and R outputs is between 9 and 11 Vpp, and red when above 11 Vpp. This pre-amp has been designed with line level signals in mind, like those coming from another synthesizer or professional audio equipment. High impedance instrument outputs like electric guitars might not produce the best sound when connected directly to this module.
Current consumption
+12V --> 110mA
-12V --> 110mA
Dimensions
Height: 20cm
Width: 5cm
Depth: 5cm
PCB set
- Front Panel
- Controls
- LEDs Aligner
- Main
- Mezzanine
Gerbers
https://github.com/DeMarco/DMH-Output/tree/main/Gerbers
Schematic and BoM
https://github.com/DeMarco/DMH-Output/blob/main/DMH_Output_Schematic.pdf
https://github.com/DeMarco/DMH-Output/blob/main/DMH_Output_BoM.csv
Assembly and Calibration Instructions
https://github.com/DeMarco/DMH-Output/blob/main/Assembly_Instructions.md
Font
For viewing/customizing in KiCad, I recommend downloading and installing the Nulshock font from Typodermic: https://typodermicfonts.com/nulshock/
Parts
96| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C47, C48, C50, C52, C54, C56, C57, C59, C70, C72, C79, C80 |
| 10 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R30, R31, R32, R33, R44, R46, R48, R49, R56, R57 |
| 9 | TRS_Jack_6.35mm_Sw | SynthStuff:CUI_SJ-63083D | J1, J2, J3, J4, J5, J6, J7, J8, J9 |
| 8 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D3, D4, D5, D6, D33, D34, D43, D44 |
| 8 | 22k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R5, R8, R84, R89, R92, R97 |
| 4 | 100pF | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C11, C12, C13, C14 |
| 4 | 10R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R52, R53, R58, R59 |
| 4 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C5, C6, C23, C24 |
| 4 | 470R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R6, R86, R94 |
| 4 | TestPoint | Connector_Pin:Pin_D1.0mm_L10.0mm | TP21, TP22, TP23, TP24 |
| 3 | Conn_01x06_PinHeader | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J26, J27, J31 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R45, R47 |
| 2 | 47uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C2 |
| 2 | 68K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R87, R95 |
| 2 | 68k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R80, R81 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J24, J25 |
| 2 | Conn_01x02_PinHeader | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J35, J36 |
| 2 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J23, J28 |
| 2 | NE5532 | Package_DIP:DIP-8_W7.62mm_Socket | U13, U15 |
| 2 | SB140 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 2 | TL072 | Package_DIP:DIP-8_W7.62mm_Socket | U1, U20 |
| 2 | TL074 | Package_DIP:DIP-14_W7.62mm_Socket | U8, U11 |
| 1 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J0 |
| 1 | Conn_01x04_PinHeader | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J29 |
| 1 | IDC_02x05 | SynthStuff:IDC-Header_2x05_P2.54mm_Vertical_BackBone | J200 |
| 1 | IDC_02x05 | SynthStuff:IDC-Header_2x05_P2.54mm_Vertical_Eurorack | J100 |
More from DeMarco/DMH-Output
2- 2 layers49 × 164.5 mm

- 2 layers48 × 121 mm

Similar boards
- 4 layers91.4 × 81.3 mm

Dac
prydin/toy-dac
A 1-bit ΔΣ stereo audio DAC implemented on a Xilinx 7-series FPGA (Digilent Cmod S7), driven from an I²S input.
50 parts4 - 2 layers180 × 133.3 mm

- 2 layers49 × 175 mm

DMH Dual VCA Mk3 PCB Main
DeMarco/DMH-Dual-VCA-Mk3
Version 3 of my stereo VCA in Kosmo format
98 partsCC0-1.0 - 2 layers165 × 103.8 mm

Output pcb
QuinnFreedman/modular
A collection of free & open source DIY synthesizer module designs for Eurorack
128 parts116 - 2 layers80 × 60 mm

- 4 layers133.9 × 165.1 mm

Main VCO board
JordanAceto/micro_ox
Monosynth with analog signal path and digital controls. SSI2130 VCOs and SSI2140 VCF.
295 parts8CC-BY-4.0 - 2 layers57 × 28.7 mm

- 2 layers147.4 × 63.2 mm

Guitar down octave
MR-DOS/guitar_down_octave
A octave-down effect for guitar. All analog, no microcontroller, no DSP.
219 parts5GPL-3.0
Questions
How big is the DMH Output PCB Main PCB?
It measures 49 × 175 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DMH Output PCB Main use?
96 parts, built around the NE5532, TL072 and SB140. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DMH Output PCB Main KiCad files?
From the DeMarco/DMH-Output repository on GitHub, at the commit this page was made from: the board is DMH_Output_PCB_Main/DMH_Output_PCB_Main.kicad_pcb and its schematic DMH_Output_PANEL/DMH_Output_PANEL.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DMH Output PCB Main design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).