

Fightstick pcb
Projet de fightstick avec stick analogique
- Size
- 87.5 × 70.5 mm
- Copper layers
- 2
- Thickness
- 1 mm
- Parts
- 118
- Nets
- 93
- Pads
- 391
- Tracks, vias
- 618, 131
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 5 Jun 2024
- Updated
- 30 Jul 2024
Overview
Fightstick pcb is an open-source printed circuit board by DavidDuchesne, from the DavidDuchesne/Fightstick repository on GitHub. It is a 2-layer board of 87.5 × 70.5 mm with 118 parts on 93 nets, routed with 618 tracks and 131 vias.
It is built around the RP2040, W25Q128JVSIQ and SN74LVC1G14DBV, with the ABM8-272-T3 among its other parts. Its parts include 54 capacitors, 35 resistors, 15 ICs, 6 connectors and 1 diode. It belongs with the RP2040 boards of this library.
Main components
4RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHSN74LVC1G14DBV
SOT-23-5-40℃~+85℃ 1 1 1.16V~3.33V 1.65V~5.5V 10uA 2.3V 32mA 32mA 390mV~1.87V 550mV 6.5ns@2.5V,50pF 74LVC Schmitt trigger 电源关断保护、噪声抑制功能 SOT-23-5 Inverters ROHSTexas InstrumentsInvertersABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
README
README.mdFightstick
Projet de fightstick avec stick analogique
Le débouncing est fait avec un filtre RC.
Fait avec le désign minimal pour le RP2040 fournie.
Gaming
Parts
118| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | 1u | Capacitor_SMD:C_0805_2012Metric | C3, C4, C11, C12, C16, C17, C20, C21, C22, C25, C26, C28, C30, C31, C37, C38 +10 |
| 15 | 1k | Resistor_SMD:R_0805_2012Metric | R3, R4, R5, R7, R10, R11, R15, R16, R19, R20, R27, R28, R33, R34, R35 |
| 12 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C6, C7, C14, C15, C23, C24, C34, C35, C43, C44, C51, C52 |
| 12 | 5.1k | Resistor_SMD:R_0805_2012Metric | R1, R2, R8, R9, R13, R14, R17, R18, R24, R25, R31, R32 |
| 12 | SN74LVC1G14DBV | Package_TO_SOT_SMD:SOT-23-5 | U1, U2, U5, U6, U7, U8, U10, U11, U12, U13, U14, U15 |
| 11 | 100n | Capacitor_SMD:C_0805_2012Metric | C13, C18, C19, C27, C29, C32, C33, C36, C39, C40, C50 |
| 5 | 130 | Resistor_SMD:R_0805_2012Metric | R12, R23, R26, R29, R30 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric | C5, C10, C45 |
| 3 | Screw_Terminal_01x12 | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x12_P3.50mm_Horizontal | J4, J5, J6 |
| 2 | 15p | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 27 | Resistor_SMD:R_0805_2012Metric | R21, R22 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J3 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | DNF | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | LOGO | LOGO | G*** |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | RP2040 | RP2040_minimal:RP2040-QFN-56 | U9 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1 |
| 1 | USB_B_Micro | RP2040_minimal:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal_modified | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U4 |
Similar boards
- 4 layers90 × 100 mm

- 4 layers277.2 × 107.5 mm

Katia
ikajdan/katia
A split keyboard with 6 by 3 column staggered keys and 3 thumb keys, based on the Crkbrd design
230 parts33CERN-OHL-P-2.0 - 4 layers51.8 × 20 mm

Sample target
alvarop/swd2usbc
Have you ever wanted to debug your device over USB-C? Sometimes there's not enough room for a JTAG/SWD connector, or even Tag-Connect pads!
57 parts29CC0-1.0 - 4 layers61.8 × 79.6 mm

- 4 layers40 × 58.5 mm

- 2 layers174 × 111 mm

Pedalboard hw
pedalboard/pedalboard-hw
pedalboard audio midi processor open hardware
169 parts14CERN-OHL-P-2.0 - 2 layers110 × 52 mm

- 2 layers62 × 47 mm

Questions
How big is the Fightstick pcb PCB?
It measures 87.5 × 70.5 mm and has 2 copper layers, 1 mm thick.
What parts does the Fightstick pcb use?
118 parts, built around the RP2040, W25Q128JVSIQ, SN74LVC1G14DBV and ABM8-272-T3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fightstick pcb KiCad files?
From the DavidDuchesne/Fightstick repository on GitHub, at the commit this page was made from: the board is KiCad/fightstick_pcb/fightstick_pcb.kicad_pcb and its schematic KiCad/fightstick_pcb/fightstick_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fightstick pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask DavidDuchesne before reusing the design.