Skip to the content
2 layers16.3 × 17.8 mmToslink ipod, the printed circuit board in 3D

Adding optical digital audio output to classic iPods

Size
16.3 × 17.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
19
Pads
51
Tracks, vias
105, 0
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
20 Dec 2020
Updated
17 May 2021

Overview

Toslink ipod is an open-source printed circuit board by DavidBuchanan314, from the DavidBuchanan314/ipod-toslink-mod repository on GitHub, published under the MIT licence. It is a 2-layer board of 16.3 × 17.8 mm with 20 parts on 19 nets, routed with 105 tracks and 0 vias.

Its parts include 7 resistors, 4 capacitors, 1 IC and 1 crystal.

README

README.md

ipod-toslink-mod

Adding optical digital audio output to classic iPods

NOTE: The current PCB files are untested. I am waiting for parts etc. to build and test the first batch, which should hopefully be some time in January 2021.

Update: This doesn't really work due to clock synchronisation issues. There's constant clicking/crackling due to the clock jitter inherent in the LRCLK. Would need additional parts to clean up the signal maybe? Dunno...

Wiring

There are 5 wires that must be soldered to the iPod motherboard. You will need to scrape the soldermask from the top of the 3 vias before soldering, using a sharp knife.

motherboard pads

Parts

20
QtyValueFootprintReferences
7TestPointTestPoint:TestPoint_Pad_D1.0mm3v3, BCK, DIN, GND, L-, L+, LRCK
610KResistor_SMD:R_0603_1608MetricR1, R2, R3, R4, R5, R6
215pFCapacitor_SMD:C_0603_1608MetricC3, C4
10.1uFCapacitor_SMD:C_0603_1608MetricC2
11uFCapacitor_SMD:C_0603_1608MetricC1
122.5792MHzCrystal:Crystal_SMD_FOX_FE-2Pin_7.5x5.0mm_HandSolderingY1
1220RResistor_SMD:R_0603_1608MetricR7
1WM8804Package_SO:SSOP-20_5.3x7.2mm_P0.65mmU1

Similar boards

  • 2 layers66.9 × 74.5 mmDeskHop Rev1, the printed circuit board in 3D

    DeskHop Rev1

    hrvach/deskhop

    Fast Desktop Switching Device

    20 parts7.9kGPL-3.0
  • 2 layers86.4 × 64.8 mmSlot machine, the printed circuit board in 3D

    Slot machine

    google/google-ctf

    Google CTF

    20 parts5.1kApache-2.0
  • 2 layers36.2 × 26.8 mmEsp32 minimal, the printed circuit board in 3D

    Esp32 minimal

    atopile/atopile

    Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

    20 parts4kMIT
  • 2 layers108.1 × 393.8 mmSweep compact ble, the printed circuit board in 3D

    Sweep compact ble

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    20 parts2.1k
  • 2 layers26 × 15.9 mmTPS54340 Buck Regulator, the printed circuit board in 3D

    TPS54340 Buck Regulator

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    20 parts1.2k
  • 2 layers67.6 × 30.5 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    20 parts1kGPL-3.0
  • 2 layers44.3 × 28.7 mmLin bus adapter esp32, the printed circuit board in 3D

    Lin bus adapter esp32

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    20 parts915
  • 2 layers89.5 × 61.6 mmFreeDeck TH 2020-02, the printed circuit board in 3D

    FreeDeck TH 2020-02

    FreeYourStream/freedeck-hardware

    all the stuff you need to build your own FreeDeck

    20 parts772

Questions

How big is the Toslink ipod PCB?

It measures 16.3 × 17.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Toslink ipod use?

20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Toslink ipod KiCad files?

From the DavidBuchanan314/ipod-toslink-mod repository on GitHub, at the commit this page was made from: the board is pcb/toslink_ipod.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Toslink ipod design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).