Skip to the content
2 layers120 × 120 mmTeaPCB, the printed circuit board in 3D

Set a timer and have your tea bag automcatily mechanically removed, custome PCB and Firmware for each component

Size
120 × 120 mm
Copper layers
2
Thickness
1.6 mm
Parts
8
Nets
31
Pads
53
Tracks, vias
60, 0
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
14 Sep 2024
Updated
4 Oct 2024

Overview

TeaPCB is an open-source printed circuit board by David-Feldt, from the David-Feldt/Tea-Steeping-Robot repository on GitHub. It is a 2-layer board of 120 × 120 mm with 8 parts on 31 nets, routed with 60 tracks and 0 vias.

Its parts include 1 resistor, 1 IC and 1 switch. It belongs with the ESP8266 boards of this library.

README

README.md

Tea steeping robot

I found myself forggetting to take my tea bag and how long its been in the water. This robot you set a timer and it will remove the tea bag to your desired time.

  • Built using esp8266 devboard and esp8266 (based on freeRTOS)
  • PCB was made in KiCad
  • Mechanical is built with scrap material

image image

Parts

8
QtyValueFootprintReferences
1LOGOcat:cat2G***
1NodeMCU_1.0_(ESP-12E)ESP8266:NodeMCU1.0(12-E)U1
1RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
1R_PotentiometerPotentiometer_THT:Potentiometer_Alps_RK09Y11_Single_HorizontalRV1
1SSD1306SSD1306:128x64OLEDBrd1
1SW_PushButton_Switch_THT:SW_Push_2P1T_Toggle_CK_PVA1xxH1xxxxxxV2SW1
1~1_david:stepper motorM2

The 7 most common of 8 parts.

Similar boards

  • 2 layers20.5 × 24.8 mmPi interface, the printed circuit board in 3D

    Pi interface

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    8 parts3.7k
  • 2 layers59.9 × 25.7 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    8 parts1kGPL-3.0
  • 2 layers52 × 12.6 mmUSB, the printed circuit board in 3D

    USB

    shanteacontrols/OpenDeck

    A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

    8 parts960Apache-2.0
  • 2 layers87.5 × 48.5 mm7 input macropad, the printed circuit board in 3D

    7 input macropad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    8 parts915
  • 2 layers36.2 × 63.1 mmPicoMemcard pico, the printed circuit board in 3D

    PicoMemcard pico

    dangiu/PicoMemcard

    Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

    8 parts694GPL-3.0
  • 2 layers36 × 10 mmPCB4-PWR BTN Rev.A, the printed circuit board in 3D

    PCB4-PWR BTN Rev.A

    OLIMEX/DIY-LAPTOP

    Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

    8 parts578Apache-2.0

Questions

How big is the TeaPCB PCB?

It measures 120 × 120 mm and has 2 copper layers, 1.6 mm thick.

What parts does the TeaPCB use?

8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TeaPCB KiCad files?

From the David-Feldt/Tea-Steeping-Robot repository on GitHub, at the commit this page was made from: the board is teaPCB/teaPCB.kicad_pcb and its schematic teaPCB/teaPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the TeaPCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask David-Feldt before reusing the design.