
KOSMOS LFO6 Jack Panel
DavesKosmoModules/Brenn-Slow-LFO
I have been using the lfo for slow evolving movement of sounds, it is not a replacement for a standard lfo, normal tremolo and vibrato can not be realized with this module.

I have been using the lfo for slow evolving movement of sounds, it is not a replacement for a standard lfo, normal tremolo and vibrato can not be realized with this module.
KOSMOS LFO6 is an open-source printed circuit board by DavesKosmoModules, from the DavesKosmoModules/Brenn-Slow-LFO repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 96.1 × 115 mm with 105 parts on 81 nets, routed with 714 tracks and 27 vias.
It is built around the LM13700M. Its parts include 53 resistors, 20 capacitors, 14 diodes, 5 ICs and 4 transistors.

100mm Quad Slow LFO
I have been using the lfo for slow evolving movement of sounds, it is not a replacement for a standard lfo, normal tremolo and vibrato can not be realized with this module.
It is based on the single cell VCO on the LM13700 datasheet, this is a triangle wave with a big step so I added a LPF to each oscillator.
Contained are schematics & gerber files for pcb fabrication of both electrical aux and front panel. This is sutiable for entry level however a basic level of electronics, soldering, fault finding, and some basic tools are required.
If you wish to edit in ki-cad the following dependencies are required
| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R14, R15, R16, R17, R18, R19, R20, R21, R22, R27, R33, R34, R35, R39, R43 +9 |
| 10 | 0.1uF | Capacitor_THT:C_Disc_D6.0mm_W4.4mm_P5.00mm | C1, C2, C5, C6, C9, C10, C11, C12, C13, C14 |
| 8 | 1N914 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D6, D7, D8, D9 |
| 8 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R23, R24, R25, R26, R51, R52, R53, R54 |
| 8 | 7.5k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3, R4, R5, R29, R30, R31, R32 |
| 4 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R28, R36, R42, R50 |
| 4 | 1M | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical_CircularHoles | RV1, RV2, RV6, RV7 |
| 4 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12, R13, R40, R41 |
| 4 | 1uF | Capacitor_THT:C_Disc_D6.0mm_W4.4mm_P5.00mm | C7, C8, C17, C18 |
| 4 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1, Q2, Q3, Q4 |
| 4 | 470uF | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C3, C4, C15, C16 |
| 4 | 5.1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9, R10, R37, R38 |
| 4 | LED | LED_THT:LED_D5.0mm | D5, D10, D11, D14 |
| 3 | TL074 | Package_DIP:DIP-14_W7.62mm_LongPads | U3, U4, U5 |
| 2 | 100k | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical_CircularHoles | RV3, RV4 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C19, C20 |
| 2 | 1N5817 | Diode_THT:D_DO-41_SOD81_P12.70mm_Horizontal | D12, D13 |
| 2 | LM13700 | Package_DIP:DIP-16_W7.62mm_LongPads | U1, U2 |
| 1 | -5vTrimpot | Potentiometer_THT:Potentiometer_Bourns_3299W_Vertical | RV8 |
| 1 | Power | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J1 |
| 1 | TO JACKS | Connector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_Vertical | J2 |

DavesKosmoModules/Brenn-Slow-LFO
I have been using the lfo for slow evolving movement of sounds, it is not a replacement for a standard lfo, normal tremolo and vibrato can not be realized with this module.


mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules


clacktronics/EuroClack_BYOM_Modules
In this repository is all the modules in the book for Build Your Own Modular the Clacktronics ring binder product to build your own modular synthesizer from scratch. clacktronics.co.uk/byom/.


gligli/overcycler
Affordable DIY polyphonic hybrid single cycle / analog synthesizer


It measures 96.1 × 115 mm and has 2 copper layers, 1.6 mm thick.
105 parts, built around the LM13700M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DavesKosmoModules/Brenn-Slow-LFO repository on GitHub, at the commit this page was made from: the board is KOSMOS LFO6.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).