Skip to the content
2 layers31.3 × 26.5 mmPDM Board mini, the printed circuit board in 3D

A PCB that uses a FAN3852 to convert analog electret microphone data to PDM data. Then a Sigma-Delta ADC can receive the data and create a full PCM signal

Size
31.3 × 26.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
11
Pads
41
Tracks, vias
56, 10
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
6 May 2026
Updated
7 May 2026

Overview

PDM Board mini is an open-source printed circuit board by DannyCato, from the DannyCato/Electret_To_PDM repository on GitHub, published under the MIT licence. It is a 2-layer board of 31.3 × 26.5 mm with 17 parts on 11 nets, routed with 56 tracks and 10 vias.

It is built around the FAN3852UC16X. Its parts include 5 resistors, 3 capacitors, 2 connectors, 1 IC and 1 inductor. It belongs with the audio and music boards of this library.

Main components

1

README

README.md

Electret To PDM

This is a KiCad project that uses a FAN3852 to convert analog electret microphone data to PDM data. It is mounted on a 2-layer PCB with all the parts on the top layer

Additionally, it has grounded mounting pads and a power good LED to see if the connection is working.

Usage

To be used where there is no better option to turn analog microphone signals into a digital signal. In my case, a Sigma-Delta ADC was used to convert the PDM data into PCM data so that it could more easily be converted into a WAV File for our data collection.

A 1-4 MHz Clock signal should be provided for the FAN Chip to produce PDM data.

Connectors

MOLEX SL 70555 series connectors (4 pin for PDM side and 2 pin for Electret side) are used for this board, but switching them out for something else is not difficult

Schematic

Schematic

Layout

The back layer is almost entire a Ground Plane aside for the few times where wires need to cross over others.

Layout Front

Parts

17
QtyValueFootprintReferences
4MountingHole_PadMountingHole:MountingHole_2.2mm_M2_PadH1, H2, H3, H4
210kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR4, R5
22.2kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR2, R3
10.1kResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR1
1100nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC2
110nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC3
11nFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC1
1705550001pdm_board_mini_library:MOLEX_SL_7055501_2PRAJ2
1705550003pdm_board_mini_library:MOLEX_SL_7055503_4PRAJ1
1FAN3852UC16Xpdm_board_mini_library:BGA6C40P2X3_84X124X50U1
1Jumper_3_OpenConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJP1
1LEDLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderL1

Similar boards

  • 2 layers50 × 35 mmServo power, the printed circuit board in 3D

    Servo power

    earthtojake/text-to-cad

    Design physical products with AI

    17 parts26kMIT
  • 2 layers139.7 × 62.2 mmBreakout 60pin EEC IV, the printed circuit board in 3D

    Breakout 60pin EEC IV

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    17 parts1.2k
  • 2 layers29.2 × 55.9 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    17 parts1kGPL-3.0
  • 2 layers24.5 × 36.5 mmCluster, the printed circuit board in 3D

    Cluster

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    17 parts993
  • 2 layers56.3 × 55.7 mmStarNecklace, the printed circuit board in 3D

    StarNecklace

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    17 parts915
  • 2 layers25 × 25 mmSmallEncoder, the printed circuit board in 3D

    SmallEncoder

    DDeGonge/OS-ARM

    This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…

    17 parts498MIT
  • 2 layers38.9 × 16.1 mmAmoeba spc, the printed circuit board in 3D

    Amoeba spc

    mtl/keyboard-pcbs

    Keyboard PCBs

    17 parts485
  • 2 layers36 × 51 mmABSIS ALE, the printed circuit board in 3D

    ABSIS ALE

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    17 parts431

Questions

How big is the PDM Board mini PCB?

It measures 31.3 × 26.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PDM Board mini use?

17 parts, built around the FAN3852UC16X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PDM Board mini KiCad files?

From the DannyCato/Electret_To_PDM repository on GitHub, at the commit this page was made from: the board is PDM_Board_mini.kicad_pcb and its schematic PDM_Board_mini.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PDM Board mini design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).