Skip to the content
2 layers37.2 × 55 mmUnUn BNC, the printed circuit board in 3D

a collection of antenna related designs (mostly based on the UniBalun Project)

Size
37.2 × 55 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
3
Pads
42
Tracks, vias
35, 29
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
21 Sep 2022
Updated
7 Nov 2023

Overview

UnUn BNC is an open-source printed circuit board by DG1JAN, from the DG1JAN/AntennaPlayground repository on GitHub. It is a 2-layer board of 37.2 × 55 mm with 15 parts on 3 nets, routed with 35 tracks and 29 vias.

Its parts include 5 connectors, 1 capacitor and 1 IC.

README

DL1HBT_UnUn/README.md

DL1HBTUnUn

Based on the UniBalun Project, a modification requested from Tom (DL1HBT).

The BNC connector can be found here: https://amzn.eu/d/83ZCG39

This 1:49 UnUn can be direct connected to the TRX output Jack.

Due to the missing coax Feedline it is recomendet to use a counterpoise with min. 0.05 of the maximum used wave length.

Parts

15
QtyValueFootprintReferences
2MountingHoleMountingHole:MountingHole_4.5mmH5, H5
1100pFUniBalunLibrary:THT_capC1
1A_SMD_PADUniBalunLibrary:4mmJackJ6
1A_THT_PadConnector_Wire:SolderWire-1.5sqmm_1x01_D1.7mm_OD3.9mmJ5
1BMountingHole:MountingHole_3.2mm_M3_PadH1
1BNCConnector_Coaxial:BNC_Amphenol_B6252HB-NPP3G-50_HorizontalJ1
1B_SMD_PADUniBalunLibrary:4mmJackJ4
1B_THT_PadConnector_Wire:SolderWire-1.5sqmm_1x01_D1.7mm_OD3.9mmJ3
1CoreUniBalunLibrary:FT82_BalunU2

The 10 most common of 15 parts.

More from DG1JAN/AntennaPlayground

2
  • 2 layers37.2 × 51.3 mmDL1HBT, the printed circuit board in 3D

    DL1HBT

    DG1JAN/AntennaPlayground

    a collection of antenna related designs (mostly based on the UniBalun Project)

    12 parts15
  • 2 layers30.8 × 24 mmMicroUnUn, the printed circuit board in 3D

    MicroUnUn

    DG1JAN/AntennaPlayground

    a collection of antenna related designs (mostly based on the UniBalun Project)

    7 parts15

Similar boards

  • 2 layers19 × 76 mmSub, the printed circuit board in 3D

    Sub

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    15 parts3kApache-2.0
  • 2 layers26.7 × 62.2 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    15 parts1kGPL-3.0
  • 2 layers100 × 44 mmVideoslot, the printed circuit board in 3D

    Videoslot

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    15 parts1k
  • 2 layers91 × 51 mmBusinessCard, the printed circuit board in 3D

    BusinessCard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    15 parts915
  • 2 layers24.3 × 57.9 mmFlosspods pro flex, the printed circuit board in 3D

    Flosspods pro flex

    kenp-io/not-for-airpods-repairs

    The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

    15 parts609WTFPL
  • 2 layers20.3 × 15.2 mmL0 Load, the printed circuit board in 3D

    L0 Load

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    15 parts546MIT
  • 2 layers68 × 50 mmEleLab v2 PowerFeed, the printed circuit board in 3D

    EleLab v2 PowerFeed

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    15 parts531GPL-3.0
  • 2 layers50.8 × 35.6 mmInterface, the printed circuit board in 3D

    Interface

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    15 parts454

Questions

How big is the UnUn BNC PCB?

It measures 37.2 × 55 mm and has 2 copper layers, 1.6 mm thick.

What parts does the UnUn BNC use?

15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the UnUn BNC KiCad files?

From the DG1JAN/AntennaPlayground repository on GitHub, at the commit this page was made from: the board is UnUn_BNC_1.2/UnUn_BNC.kicad_pcb and its schematic CMC/CMC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the UnUn BNC design in my own project?

Its repository states no licence, so its author keeps all rights: ask DG1JAN before reusing the design.