
Gps timestamper
DAlexis/gps-timestamper
This will be a hardware project providing GPS timestamping.

This will be a hardware project providing GPS timestamping.
Grouped is an open-source printed circuit board by DAlexis, from the DAlexis/gps-timestamper repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 80 × 85.7 mm with 118 parts on 131 nets, routed with 867 tracks and 137 vias.
It is built around the MCP633-E/SN, 74HC04D and USBLC6-4SC6, with the RJ45 among its other parts. Its parts include 34 capacitors, 26 resistors, 16 diodes, 11 ICs and 10 connectors. It belongs with the radio and wireless boards and the STM32 boards of this library.
Open-source device based on STM32 that provides precision time stamps of trigger signal connected to input. It use GPS PPS signal to provide ~1uS precision time mesurment. Also it makes self-calibration by PPS every second.
Device may be used to synchronize any signals and data streams without wired or wireless connection i.e. in geophysical researches, lightning detection networks, seismology and others
Currently project in protortype state and under development. Primary function (precision timestamping) works correctly.
To build firmware you may have installed arm-gcc toolchain on your
linux system. If you do not need unit tests, simply comment out
corresponding line in root CMakeLists.txt (to build tests gtest should
be installed on your system)
Run build.sh and thats all. To flash MCU, connect ST-Link device to
PC and then run flash.sh.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100n | Capacitors_SMD:C_0805 | C1, C2, C4, C5, C5, C6, C6, C7, C7, C8, C9, C10, C11, C12, C19 |
| 8 | 1N4148 | Diodes_SMD:D_SOD-323 | D1, D1, D2, D2, D3, D3, D4, D5 |
| 8 | 1k | Resistors_SMD:R_0805 | R5, R9, R10, R11, R12, R14, R16, R17 |
| 6 | 10uF | Capacitors_SMD:C_0805 | C21, C22, C23, C24, C25, C26 |
| 6 | MCP633 | SMD_Packages:SOIC-8-N | U1, U2, U4, U5, U6, U7 |
| 4 | 10k | Resistors_SMD:R_0805 | R3, R4, R7, R8 |
| 4 | 1M | Resistors_SMD:R_0805 | R1, R2, R3, R4 |
| 4 | 50k | Resistors_SMD:R_0805 | R1, R2, R5, R6 |
| 4 | LED | LEDs:LED_0805 | D5, D7, D8, D9 |
| 4 | WHOLES-LINE-3 | components:wholes-line-3 | wholes, wholes, wholes, wholes |
| 3 | 100uF | Capacitors_Tantalum_SMD:CP_Tantalum_Case-B_EIA-3528-21_Wave | C3, C18, C20 |
| 3 | 2.2uF | Capacitors_SMD:C_0805 | C13, C14, C15 |
| 2 | 20pF | Capacitors_SMD:C_0805 | C16, C17 |
| 2 | CONN_COAXIAL | Connect:SMA_THT_Jack_Straight | J1, J2 |
| 2 | C_film | Capacitors_ThroughHole:C_Disc_D7.5mm_W5.0mm_P7.50mm | C1, C2 |
| 2 | Lamp_Neon | Capacitors_ThroughHole:C_Disc_D9.0mm_W5.0mm_P5.00mm | NE1, NE2 |
| 2 | MCP633 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U1, U2 |
| 2 | USBLC6-4SC6 | TO_SOT_Packages_SMD:SOT-23-6 | D4, D11 |
| 1 | 1.5k | Resistors_SMD:R_0805 | R7 |
| 1 | 100 | Resistors_SMD:R_0805 | R8 |
| 1 | 100k | Resistors_SMD:R_0805 | R6 |
| 1 | 22pF | Capacitors_SMD:C_0805 | C8 |
| 1 | 470 | Resistors_SMD:R_0805 | R13 |
| 1 | 470uF | Capacitors_Tantalum_SMD:CP_Tantalum_Case-D_EIA-7343-31_Wave | C4 |
| 1 | 74HC04 | SMD_Packages:SOIC-14_N | U9 |
| 1 | 8MHz | Crystals:Crystal_HC49-U_Vertical | Y1 |
| 1 | Buzzer | Buzzers_Beepers:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | CP | Capacitors_Tantalum_SMD:CP_Tantalum_Case-B_EIA-3528-21_Wave | C3 |
| 1 | Ferrite_Bead | Resistors_SMD:R_0805 | L1 |
| 1 | GND | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J4 |
| 1 | GPS | Connect:RJ45_8 | J1 |
| 1 | Input | Connect:RJ45_8 | J2 |
| 1 | Jumper | Connect:GS2 | JP1 |
| 1 | Jumper_NC_Dual | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | JP1 |
| 1 | L | Resistors_SMD:R_0805 | L1 |
| 1 | LED_CH0 | LEDs:LED_0805 | D6 |
| 1 | LED_CH1 | LEDs:LED_0805 | D10 |
| 1 | MCP1826S | TO_SOT_Packages_SMD:SOT-223 | U3 |
| 1 | Out_select | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | JP2 |
| 1 | PPS_OUT | Connect:SMA_THT_Jack_Straight | J3 |
| 1 | R | Resistors_SMD:R_0805 | R9 |
| 1 | RJ45 | Connect:RJ45_8 | J5 |
| 1 | R_buzz | Resistors_SMD:R_0805 | R15 |
| 1 | STM32F407VGTx | Housings_QFP:LQFP-100_14x14mm_Pitch0.5mm | U8 |
| 1 | SWD | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J5 |
| 1 | USB_OTG | Connect:USB_Micro-B | J4 |
| 1 | VCC | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J3 |
The 110 most common of 118 parts.

DAlexis/gps-timestamper
This will be a hardware project providing GPS timestamping.

DAlexis/gps-timestamper
This will be a hardware project providing GPS timestamping.




InfernoEmbedded/onewire-softdevice
Software, Firmware & Documentation is licensed under GPLv3

Twisted-Fields/rp2040-motor-controller
A dual channel brushless motor controller based on the RP2040 microcontroller, designed in Kicad.


tuna-f1sh/entree
Entree is a USB-C CAN interface designed to fully support CANnectivity - gets the CAN party started!

freakontrol/stmbl
THE AUTHORS OF THIS SOFTWARE ACCEPT ABSOLUTELY NO LIABILITY FOR ANY HARM OR LOSS RESULTING FROM ITS USE. IT IS EXTREMELY UNWISE TO RELY ON SOFTWARE ALONE FOR SAFETY.
It measures 80 × 85.7 mm and has 2 copper layers, 1.6 mm thick.
118 parts, built around the MCP633-E/SN, 74HC04D, USBLC6-4SC6 and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DAlexis/gps-timestamper repository on GitHub, at the commit this page was made from: the board is schematic/grouped/2018-02-13/v2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).