Skip to the content
2 layers40 × 57 mmThermistor Remapper, the printed circuit board in 3D

Thermistor Remapper

Cxmrykk/Thermistor-Remapper

Hardware solution for mapping aftermarket temperature sensor curves to match factory ECU requirements

Size
40 × 57 mm
Copper layers
2
Thickness
1.6 mm
Parts
31
Nets
48
Pads
105
Tracks, vias
119, 1
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
14 Dec 2025
Updated
4 Jan 2026

Overview

Thermistor Remapper is an open-source printed circuit board by Cxmrykk, from the Cxmrykk/Thermistor-Remapper repository on GitHub. It is a 2-layer board of 40 × 57 mm with 31 parts on 48 nets, routed with 119 tracks and 1 via.

It is built around the XL1509-5.0E1, MX8500-8.5-04P-BK01-CU-S-A and SS14. Its parts include 17 resistors, 7 transistors, 2 capacitors, 2 ICs and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

3

Parts

31
QtyValueFootprintReferences
8???Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R3, R4, R5, R6, R7, R8
71kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR9, R10, R11, R12, R13, R14, R17
72N7002Package_TO_SOT_SMD:SOT-23_HandsolderingQ1, Q2, Q3, Q4, Q5, Q6, Q7
21RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR15, R16
122uFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC1
147uFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC2
168uHInductor_SMD:L_Bourns_SRN6045TAL1
1Arduino_Nano_v3.xModule:Arduino_NanoA1
1MX8500-8.5-04P-BK01-CU-S-Aeasyeda2kicad:CONN-TH_4P-P8.50_MX8500-8.5-04P-GN01-CU-S-AU1
1SS14Diode_SMD:D_SMA_HandsolderingD1
1XL1509-5.0E1easyeda2kicad:SOIC-8_L5.0-W4.0-P1.27-LS6.0-BLU2

Similar boards

  • 4 layers75.2 × 99.5 mmFOC, the printed circuit board in 3D

    FOC

    nordstream3/FOC

    Date | Manufacturer | amount | includes | shipping & tax | price | -------- | -------- | -------- | -------- | -------- | -------- | 2024-01-17 | JLCPCB | 10 boards | All assembled excl fets and caps | YES, to EU |…

    261 parts81
  • 4 layers180 × 120 mmMG ZS V2, the printed circuit board in 3D

    MG ZS V2

    damienmaguire/MG-EV-Inverter

    Reverse engineering of the drive motor and inverter used in MG Electric Vehicles

    177 parts17GPL-3.0
  • 2 layers33.3 × 33.3 mmELRSFC, the printed circuit board in 3D

    ELRSFC

    YeetTheAnson/Merlyn411-FlightController

    STM32F411 Based AIO Flight Controller. Superseded by [Merlyn435](https://github.com/YeetTheAnson/Merlyn435-Flight-Stack/)

    98 parts3
  • 2 layers98.6 × 98.6 mmReflowMate, the printed circuit board in 3D

    ReflowMate

    Omar-Magdy0/ReflowMate

    To start small , grow big. current focus is mainly on providing : Digital Soldering iron support Hot air gun support 3d printable Accessories

    97 parts1
  • 2 layers99.8 × 98.8 mmLocalFab, the printed circuit board in 3D

    LocalFab

    CUERT-dev/SUPERMOD_PE_DEV

    170 parts
  • 2 layers70 × 70 mmWater Cutoff, the printed circuit board in 3D

    Water Cutoff

    cyberknet/water-sensor-cutoff

    Water sensor and cutoff for HomeAssistant using an ESP32 DevKitC board

    38 parts
  • 2 layers100 × 80 mmDMX Controller, the printed circuit board in 3D

    DMX Controller

    koen1711/DMX-Controller

    DMX controller board based on ESP32 NodeMCU. Implementing both plain DMX and RDM while being able to read the entire DMX frame.

    22 parts

Questions

How big is the Thermistor Remapper PCB?

It measures 40 × 57 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Thermistor Remapper use?

31 parts, built around the XL1509-5.0E1, MX8500-8.5-04P-BK01-CU-S-A and SS14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Thermistor Remapper KiCad files?

From the Cxmrykk/Thermistor-Remapper repository on GitHub, at the commit this page was made from: the board is Hardware/thermistor-remapper/thermistor-remapper.kicad_pcb and its schematic Hardware/thermistor-remapper/thermistor-remapper.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Thermistor Remapper design in my own project?

Its repository states no licence, so its author keeps all rights: ask Cxmrykk before reusing the design.