

Imx6ulz 4L
Four layer kicad design for an iMX6ULZ processor
- Size
- 50 × 50 mm
- Copper layers
- 4
- Thickness
- 0.19 mm
- Parts
- 164
- Nets
- 248
- Pads
- 833
- Tracks, vias
- 1,631, 315
- Pours
- 31
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 25 Sep 2026
- Updated
- 25 Sep 2026
Overview
Imx6ulz 4L is an open-source printed circuit board by Cushychicken, from the Cushychicken/imx6ulz_4L repository on GitHub. It is a 4-layer board of 50 × 50 mm with 164 parts on 248 nets, routed with 1,631 tracks and 315 vias.
It is built around the MCIMX6Z0DVM09AB and K4B4G1646E-BCNB. Its parts include 73 resistors, 59 capacitors, 7 ICs, 7 connectors and 3 switches.
Main components
2MCIMX6Z0DVM09AB
MAPBGA-2890℃~+95℃ 128KB 32 Bit 900MHz ARM Cortex-ASeries Built-in+External External Power-on reset (POR)、Built-in general-purpose timer、Programmable watchdog、Integrated LDO、Calendar function、Touch function、True random number generator (TRNG)、Hardware ECC check、Independent watchdog (IWDG)、Window watchdog (WWDG) MAPBGA-289 Microcontrollers (MCU/MPU/SOC) ROHSNXP SemiconductorsMicrocontrollers (MCU/MPU/SOC)K4B4G1646E-BCNB
FBGA-960℃~+95℃ 1.066GHz 1.425V~1.575V 120mA 2mA 4Gbit Auto precharge function、Data mask function、Dynamic on-chip termination、ZQ calibration function、Asynchronous reset function DDR3 SDRAM FBGA-96 DDR SDRAM ROHSSamsung Electro-MechanicsDDR SDRAM
README
README.mdiMX6ULZ - Four Layer Design
Four layer PCB design I did of an iMX6ULZ processor.
All SCH and layout is done by hand.
Note: rev1 is broken/nonfunctional due to two major messups in board fab:
- I didn't connect the DRAM reset line to the chip.
- I didn't route a power source to the SOC's V2P5 DRAM rail.
Someday I will fix these, make a new revision, and prove to myself that the rest of this works.
Parts
164| Qty | Value | Footprint | References |
|---|---|---|---|
| 46 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R12, R25, R26, R27, R28, R29, R30, R31, R32, R33, R34, R35, R36, R37, R38 +30 |
| 36 | 0.22u | Capacitor_SMD:C_0201_0603Metric | C1, C2, C3, C12, C13, C16, C17, C18, C31, C32, C33, C34, C35, C36, C38, C39 +20 |
| 9 | 1k | Resistor_SMD:R_0402_1005Metric | R3, R17, R18, R19, R20, R21, R22, R23, R24 |
| 8 | 22uF/20%/X5R/6.3V | Capacitor_SMD:C_0402_1005Metric | C4, C8, C23, C26, C28, C63, C68, C76 |
| 6 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C6, C21, C25, C27, C37, C64 |
| 4 | 100k | Resistor_SMD:R_0402_1005Metric | R5, R8, R11, R67 |
| 4 | 22R/R0402 | Resistor_SMD:R_0402_1005Metric | R68, R69, R72, R73 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 3 | 1.5k | Resistor_SMD:R_0402_1005Metric | R13, R14, R71 |
| 3 | 10u | Capacitor_SMD:C_0402_1005Metric | C10, C42, C52 |
| 3 | 2.2uH | Inductor_SMD_Wurth:L_Wurth_WE-LQSH-4020 | L1, L2, L3 |
| 3 | TLV62568DDC | Package_TO_SOT_SMD:SOT-23-6 | U4, U5, U6 |
| 2 | 120ohm@100MHz (2A) | Inductor_SMD:L_0603_1608Metric | FB2, FB3 |
| 2 | 18p | Capacitor_SMD:C_0402_1005Metric | C11, C15 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C19, C20 |
| 2 | 240R | Resistor_SMD:R_0201_0603Metric | R15, R16 |
| 2 | JST_BM04B-SRSS-TB | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J6, J7 |
| 1 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C14 |
| 1 | 1.5K | Resistor_SMD:R_0402_1005Metric | R70 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C22 |
| 1 | 113k | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 124k | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 470R | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 549k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_SeikoEpson_TSX3225-4Pin_3.2x2.5mm | Y1 |
| 1 | G*** | kibuzzard-6744AD19 | kibuzzard-6744AD19 |
| 1 | G*** | kibuzzard-6744AD2F | kibuzzard-6744AD2F |
| 1 | G*** | kibuzzard-6744AD6D | kibuzzard-6744AD6D |
| 1 | G*** | kibuzzard-6744AE27 | kibuzzard-6744AE27 |
| 1 | G*** | kibuzzard-6744AD44 | kibuzzard-6744AD44 |
| 1 | JST_BM03B-SRSS-TB | Connector_JST:JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J3 |
| 1 | JST_BM05B-SRSS-TB | Connector_JST:JST_SH_BM05B-SRSS-TB_1x05-1MP_P1.00mm_Vertical | J5 |
| 1 | K4B4G1646E-BCNB | MT41J128M16JT-125_KTR:BGA96C80P6X16_800X1400X120 | U2 |
| 1 | LM809 | Package_TO_SOT_SMD:SOT-23-3 | U7 |
| 1 | MCIMX6Z0DVM09AB | MCIMX6Z0DVM09AB:BGA289C80P17X17_1400X1400X132 | U1 |
| 1 | MCP1700x-330xxTT | Package_TO_SOT_SMD:SOT-23 | U8 |
| 1 | Micro_SD_Card_Det_Hirose_DM3AT | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J4 |
| 1 | SW_DIP_x02 | Button_Switch_SMD:SW_DIP_SPSTx02_Slide_Copal_CHS-02B_W7.62mm_P1.27mm | SW1 |
| 1 | SW_DIP_x04 | Button_Switch_SMD:SW_DIP_SPSTx04_Slide_Copal_CHS-04B_W7.62mm_P1.27mm | SW2 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW3 |
Similar boards
- 6 layers76.2 × 76.2 mm

- 4 layers111.8 × 80.8 mm

- 4 layers47.5 × 62 mm

- 4 layers30 × 72 mm

ESP32-P4-DevKit Rev C
jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.
164 parts4 - 4 layers245 × 170 mm

Pcb b compute
meshsat/meshsat-fieldkit
MeshSat field kit hardware: the V1 kits as built, the V2 carrier PCB set for the Peli 1450 and the compact pocket-sized node (KiCad and OpenSCAD sources, generators, release files, build guides).
164 parts4CERN-OHL-S-2.0 - 4 layers90 × 50 mm

- 4 layers40 × 55 mm

CopterCat cm4
matveylapin/CopterCat_cm4
Полётный контроллер для стандарта FMU-v6u. Обычно на дронах для программирования устанавливают полётный контроллер, одноплатный компьютер и иногда arduino.
164 parts3Apache-2.0 - 4 layers98 × 100 mm

Esp32s3-can sd logger
MrBlahhhh/esp32-shield-can1-can2-kdcan-analogin-sdcard
A carrier board an ESP32-S3-DevKitC-1 plugs into, turning it into a vehicle data logger. The dev board brings the MCU and its power; this board brings everything that has to touch a car.
164 parts1
Questions
How big is the Imx6ulz 4L PCB?
It measures 50 × 50 mm and has 4 copper layers, 0.19 mm thick.
What parts does the Imx6ulz 4L use?
164 parts, built around the MCIMX6Z0DVM09AB and K4B4G1646E-BCNB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Imx6ulz 4L KiCad files?
From the Cushychicken/imx6ulz_4L repository on GitHub, at the commit this page was made from: the board is imx6ulz_4L.kicad_pcb and its schematic Unused.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Imx6ulz 4L design in my own project?
Its repository states no licence, so its author keeps all rights: ask Cushychicken before reusing the design.