Skip to the content
2 layersOximeter, the printed circuit board in 3D
Copper layers
2
Thickness
1.6 mm
Parts
30
Nets
24
Pads
90
Tracks, vias
183, 0
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
25 Oct 2024
Updated
3 Dec 2024

Overview

Oximeter is an open-source printed circuit board by CristianMSR, from the CristianMSR/Oximetro repository on GitHub. It is a 2-layer board with 30 parts on 24 nets, routed with 183 tracks and 0 vias.

It is built around the LM317EMP. Its parts include 13 resistors, 6 capacitors, 4 transistors, 4 connectors and 2 ICs. It belongs with the ESP32 boards of this library.

Main components

1

README

README.md

Oximetro

Parts

30
QtyValueFootprintReferences
410uCapacitor_SMD:CP_Elec_4x3C1, C2, C3, C4
42N3055Footprints:BJT-NPN-SMDQ1, Q2, Q3, Q4
21.5kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR3, R4
2100Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR7, R8
21000uCapacitor_THT:CP_Radial_D8.0mm_P3.80mmC5, C7
2150kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR5, R6
2270Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR10, R12
256Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR9, R11
1120Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR13
118kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR2
11kFootprints:TRIM_3296W-1-103RV1
1390kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR1
1A0Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_VerticalJ5
1BatteryConnector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_VerticalJ2
1LM317EMPPackage_TO_SOT_SMD:SOT-223-3_TabPin2U5
1Pines_ESP32Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_VerticalJ3
1TLV2374IPWRFootprints:opamp-TLV2374IPWRU6
1USB_B_MiniFootprints:miniUSB-B-20J1

More from CristianMSR/Oximetro

2
  • 2 layers41.6 × 39.5 mmOximeter, the printed circuit board in 3D

    Oximeter

    CristianMSR/Oximetro

    30 parts
  • 2 layers67.5 × 28.5 mmFuente, the printed circuit board in 3D

    Fuente

    CristianMSR/Oximetro

    17 parts

Similar boards

  • 2 layersLaser dac diff driver freerouting, the printed circuit board in 3D

    Laser dac diff driver freerouting

    robot-army/laser-dac-diff-driver

    A 16 bit Analog Devices SPI DAC with a +/- 5 Volt differential output and a PWM line driver for driving laser galvo amps

    54 parts6GPL-3.0
  • 2 layers26 × 17 mm9Vsnap, the printed circuit board in 3D

    9Vsnap

    wyolum/9Vsnap

    snaps in to 9V battery and provides 3V3 or 5V0 output

    13 parts1
  • 2 layersNoname.kicad pcb version2, the printed circuit board in 3D

    Noname.kicad pcb version2

    grtyvr/DPSPicoScope-Clone

    A clone of the great project DPIPicoscope based on AJ Scope

    48 parts
  • 2 layers124.5 × 2.5 mmNiceClock, the printed circuit board in 3D

    NiceClock

    janhieber/NiceClock

    A beautiful PCB clock

    184 partsMIT
  • 2 layers40 × 82 mmJCMuac, the printed circuit board in 3D

    JCMuac

    stonedDiscord/Automatenplatinen

    Reverse engineerte Hardware aus deutschen Spielautomaten.

    46 parts5BSD-2-Clause
  • 2 layers52.2 × 52.2 mmBase promicro, the printed circuit board in 3D

    Base promicro

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    30 parts3kApache-2.0
  • 2 layers40.6 × 15.2 mmVr mmm, the printed circuit board in 3D

    Vr mmm

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    30 parts1.2k

Questions

What parts does the Oximeter use?

30 parts, built around the LM317EMP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Oximeter KiCad files?

From the CristianMSR/Oximetro repository on GitHub, at the commit this page was made from: the board is kicad/proyectos/oximeter/oximeter-backups/oximeter-2024-10-22_200127/oximeter.kicad_pcb and its schematic kicad/proyectos/fuente/fuente.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Oximeter design in my own project?

Its repository states no licence, so its author keeps all rights: ask CristianMSR before reusing the design.