2 layers60 × 57.5 mm
2 layers49.5 × 56.4 mm
Toadstool MSPg2553
CrashBangProto/Toadstool-MSPg2553The Toadstool family is made up of breadboard-friendly prototyping boards that house a microcontroller, and modules called Caps that connect using a standard header.
- Size
- 49.5 × 56.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 38
- Pads
- 107
- Tracks, vias
- 189, 15
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 15 May 2015
- Updated
- 23 May 2015
Overview
Toadstool MSPg2553 is an open-source printed circuit board by CrashBangProto, from the CrashBangProto/Toadstool-MSPg2553 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 49.5 × 56.4 mm with 27 parts on 38 nets, routed with 189 tracks and 15 vias.
It is built around the MSP430G2553CY and LD1117. Its parts include 9 switches, 5 capacitors, 5 resistors, 2 ICs and 2 diodes. It belongs with the MSP430 boards of this library.
Main components
2README
README.md
#Toadstool-MSPg2553
Toadstool Development Board - MSP430G2553
The Toadstool family is made up of breadboard-friendly prototyping boards that house a microcontroller, and modules called Caps that connect using a standard header. The prototyping board is analagous to an Arduino/Launchpad and the Cap analagous to a shield/boosterpack.
This repository contains the schematics for the Toadstool-MSPg2553 prototyping board, a breadboard-friendly PCB that houses the Texas Instruments MSP430G2553 microcontroller.
The boards were layed out using KiCad - KiCad is open source and awesome.
There are a number of other CrashBangProto respositories containing the schematics for other Toadstool boards and Caps, as well as sample code to get you up and running.
Visit the Toadstool Webpages for more information on the project.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10uF | Toadstool:c_elec_4x5.3 | C1, C2 |
| 1 | 100nF | Capacitors_SMD:C_0805_HandSoldering | C4 |
| 1 | 10uF | Capacitors_SMD:C_0805_HandSoldering | C3 |
| 1 | 110R | Resistors_SMD:R_0805_HandSoldering | R3 |
| 1 | 120R | Resistors_SMD:R_0805_HandSoldering | R2 |
| 1 | 1nF | Capacitors_SMD:C_0805_HandSoldering | C5 |
| 1 | 200R | Resistors_SMD:R_0805_HandSoldering | R4 |
| 1 | 47k | Resistors_SMD:R_0805_HandSoldering | R5 |
| 1 | 750mA | Toadstool:MiniSMDPTC-4532 | F1 |
| 1 | BARREL_JACK | Toadstool:BARREL_JACK_No_Slot | CON1 |
| 1 | CAP_CONN_LHS | Toadstool:Socket_Strip_Straight_1x06 | K1 |
| 1 | CAP_CONN_RHS | Toadstool:Socket_Strip_Straight_1x06 | K2 |
| 1 | DEBUG_PWR | Toadstool:Pin_Header_Straight_1x03 | K4 |
| 1 | DIODE | Toadstool:Diode_D3 | D1 |
| 1 | LD1117 | Toadstool:SOT-223 | U1 |
| 1 | LOGO** | Toadstool:Toadstool_Logo | Toadstool_Logo |
| 1 | MSP-FET | Toadstool:MSP-FET_Header | K6 |
| 1 | MSP430G2553 | Toadstool:DIP-20_IC | U2 |
| 1 | PIN_1-10 | Toadstool:Pin_Header_Straight_1x10 | K7 |
| 1 | PIN_11-15 | Toadstool:Pin_Header_Straight_1x05 | K8 |
| 1 | PIN_18-20 | Toadstool:Pin_Header_Straight_1x03 | K5 |
| 1 | PWR | Toadstool:LED-0805 | D2 |
| 1 | R330 | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | RESET | Toadstool:Switch_SMT_Alps_SKQGAxE010 | SW1 |
| 1 | V-SELECT | Toadstool:Pin_Header_Straight_1x03 | K3 |
The 26 most common of 27 parts.
Similar boards
- 2 layers
- 2 layers156.8 × 67.3 mm
YM2151 STM32 VGM
AidanHockey5/YM2151_VGM_STM32
A hardware arcade video game music player based on the STM32 platform driving a YM2151
52 parts81AGPL-3.0 - 2 layers42 × 24 mm
- 4 layers40 × 47 mm
- 4 layers40 × 40 mm
- 2 layers80 × 49 mm
Obd2
kevinkrieger/CAN
CAN repository containing my CAN project, kicad files, firmware, datasheets, references, etc.
64 parts3 - 2 layers60 × 50 mm
Theia
loldavid6/Theia
An easy, cheap and open source way to add IoT to a light switch.
34 parts2CC-BY-SA-4.0
Questions
How big is the Toadstool MSPg2553 PCB?
It measures 49.5 × 56.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Toadstool MSPg2553 use?
27 parts, built around the MSP430G2553CY and LD1117. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Toadstool MSPg2553 KiCad files?
From the CrashBangProto/Toadstool-MSPg2553 repository on GitHub, at the commit this page was made from: the board is Schematics/Toadstool-MSPg2553.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Toadstool MSPg2553 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).